1, installation conditions
1 The installation of the interior door must use the installation method of the reserved hole. It is strictly forbidden to install the side wall.
2 Installation of the interior door must be installed on the door floor project (floor tile or stone). It is recommended to carry out the installation work after the wall work is completed.
2, installation testing:
1 Check whether the interior door product has a cargo damage phenomenon;
2 Measure whether the size of the hole is consistent with the product to be installed;
3 Check if the hole is regular and the wall is firm.
3. Installation tools:
Electric hammer, electric drill, woodworking hoe, planer, fine-tooth saw (hacksaw), screwdriver, square ruler, tape measure, hanging hammer, hole opener, chisel, corresponding specification drill bit, etc.
4. Installation materials:
Iron nails, self-tapping screws, 502 glue, universal glue, wood screws (40mm, 25mm), small wood strips, styrofoam, white latex, door locks, hinges, door stoppers, etc.
5, the installation process
First check whether the parts of the door are complete, whether the dimensions of the parts are correct, and whether the positions of the sets of doors to the corresponding installation are consistent with the size of the door opening.
1 fixed door frame
First, the side door frame of the door hinge is used as the reference side, and the upper rib of the reference side is used as the reference point. Fix the ribs of the reference point to the wall with large cement nails or explosion screws, and ensure that the two sides of the rim are fixed after the entire door frame is vertical.
2 secure the entire door frame
On one side of the door lock, the locking bolt of the door leaf is aligned with the locking hole of the door frame, the position is adjusted, and then three rows of reinforcing ribs are successively fixed to the wall while ensuring the vertical. The installation of the stainless steel security door can combine the "one" and "three" steps into one step and directly fix it with the explosion screw.
3 debugging
Try to open and close the door to see if it is smooth, whether the position of the door lock is accurate, easy to open and easy to close. If there is a problem, you can still make small adjustments and always adjust the position to the desired level.
4 grouting cement
Ensure that the position of the whole door is accurate. After the switch is smooth, the small holes can be opened by the impact drill in the upper and middle sections of the two side door frames. The holes in the holes are filled into the left, right and upper door frames. The door frame is closely connected to the wall and makes the door frame itself hard. (This step can be omitted depending on the installation of the stainless steel gate)
5 modified wall
After installing the entire door, the cement is leveled around the wall of the door frame, and then the surface can be matched with the paint, paint, strong paper, or tile.
The above is the detailed explanation of the interior door installation method introduced by Lao Zhuang, I hope to help you. For more information about the installation method of the interior door, please continue to pay attention to "Zhuang Buxiu". [ Follow the WeChat public number "Jiuzhengmen window network: jiuzhengmenchuang"; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzhengmen window network exchange group]
double horizontal mesh,High Quality double horizontal mesh,double horizontal mesh Details
Hebei Giant Metal Technology Co., Ltd. , https://www.wiremesh.pl