How much suitable distance between aluminum ceiling and ceiling installation
Aluminum ceiling ceilings are listed in recent years as ceiling materials. The characteristics of aluminum square pass are the ability to develop vision, ventilation effect, and distinct layers, which is very suitable for modern minimalist style decoration. Then how much is the distance between the aluminum ceiling and the suspended ceiling appropriate? What method should be used to install the aluminum ceiling ? Follow Xiaobian to learn!
Aluminium through ceiling spacing is appropriate
Generally speaking, the distance between the aluminum ceiling and the suspended ceiling is mainly based on the size of the venue. If the venue is large, the spacing should be larger. If the venue is small, the spacing should be smaller. This will make the viewing more beautiful and will not waste material. For example: 10*30 meters of space, the ceiling should be 3 meters, use 40*100 square pass, spacing 60-80 spacing.
Aluminum square ceiling installation process
1. Line positioning: This is a drawing of the installation design. In combination with the actual situation, the location of the keel and hanging point is then projected onto the floor of the floor.
2, determine the ceiling elevation: the design elevation with the line bomb around the wall or cylinder surface, if there are different elevations, it can change the position of the cross-section to the floor.
3, the fixation of the derrick or galvanized iron wire: When the ceiling is suspended, the structure must be fixed, and the first end of the structure is fixed, and the boom or the galvanized iron wire is fixed with the nail gun.
How to install aluminum square ceiling
1. Take the line: Install the horizontal line of the floor elevation, design the elevation first, then find the center point, and finally follow the center point, along the horizontal line of the elevation of the ceiling.
2. Install the main keel boom: After the good elevation and keel position lines are played, determine the elevation of the lower end of the boom and install it.
3, the installation of the main meridian: After the selection of C38 light steel keel as the main keel, distance to within 1200mm, and other supporting suspended ceiling connection.
4. Installation side keel: According to the ceiling height of the ceiling, cement keels are fixed around the wall with cement nails, and the distance between cement nails is not more than 300mm.
5, the installation of sub keel: sub keel is to be hung on the main keel, when the length of the keel needs to be extended, the direct use of sub keel connections.
6, install the metal plate: In the installation of ceilings, the middle also use a secondary keel to pull out a baseline, the installation should be gently, you must follow the edge of the flanging order to gently press on both sides of the board, after the card into the keel and push tight.
7, clean up: After installation, we must clean up, wipe clean with a rag.
8, check: Check the installation is qualified to see if there are problems, etc., to avoid follow-up quality problems, causing unnecessary disputes.
Xiao Bian concludes: how many suitable aluminum ceiling ceiling spacing, installation of aluminum ceiling ceiling with what method is introduced to this, presumably we have knowledge of aluminum Fangtong ceiling has a certain understanding, if you need to install the ceiling, Then you can make a good reference, maybe you can help.
Dynachrome is Mordant Dyes with good levelling, outstanding fastness to light and washing.
Mordant Dyes Must use certain metal salts (such as aluminum, chromium salts, etc.) for the media, in order fixing the dye on the fiber. Such as alizarin must be aluminum (alum) for the media, in order to cotton fibers dyed red. The more complex staining procedure, dye products are generally dark color.
Mordant Dyes
Mordant Dyes, Mordant Black Dyes, Mordant Dyes Blue
Dynasty Chemicals (NingBo) Co., Ltd. , https://www.dychemco.com