The key to spring decoration is moisture-proof. If the moisture-proof work is not handled well, it will easily occur when the autumn wind blows, the wood is deformed, the floor is upturned, and the wall cracks. Xiaobian hereby collects some scientific moisture-proof solutions for your reference.
wood
In the home decoration, the proportion of wood materials used is large, and the thermal expansion and contraction of wood products are greatly affected by the climate. The dry and wet conditions of the climate affect the moisture content of the wood materials, and the spring weather conditions are suitable to control the moisture content of the wood materials to 13 Less than %. If the general wood moisture content exceeds this ratio, the change in thermal expansion and contraction will be obvious, thus affecting the construction quality.
The moisture-proof method of wood is to buy at the big distributors when buying wood. Because the wood of the big dealers has been dried, it can be directly transported to the room to be renovated, reducing the intermediate links, reducing the chance of wood moisture. Place it on the floor for two or three days, and then adjust to the gas phase, and then carry out the necessary moisture-proof treatment. In this way, the wood will basically no longer have the problem of deformation.
Pots, dishes
Washed pots and dishes must be wiped with a dry rag, then bake them with a dryer, or erect them, then put them into the cupboard.
bathroom
1. The exhaust fan is the basic equipment of the bathroom. If there is no exhaust fan, the door should be closed when the bathroom is left out of the bathroom. After the water vapor condenses, it can be dried or blown by an electric fan.
2, please install a shower curtain as much as possible to prevent splashing of bath water (special attention should be paid to the moisture and dehumidification of the socket of the bathroom, so as to prevent the baby from accidentally getting an electric shock).
3, the toilet should not be built under the stairs, do not use plastic wall materials; wall tile, floor tile joints should be painted with white cement, if the brick seam produces black spots, it means that the moisture is too heavy, moldy.
wall
The wall is constructed to be waterproof and coated with a waterproof paint. In addition to the dehumidifier, the fan can be blown for 24 hours. On weekdays, windows should be opened as much as possible to allow air to convect, but in rainy days, windows should be closed to prevent moisture intrusion.
wardrobe
The humidity control is not good and the clothes are prone to mildew.
Solution:
1. Do not tidy up the clothes on rainy days to avoid moisture intrusion in the air.
2, you can use some natural conditions for moisture, dehumidification treatment, such as the sun.
3. When using the desiccant, be careful to prevent the liquid inside the box from leaking and contaminating the clothes. At the same time, the clothes containing elastic fiber materials, such as swimsuits, should not be placed together with the desiccant because the smell of the desiccant may relax the elastic fibers. , deformation.
4, wet shoes can be filled with newspapers, one can absorb the water, and second, can keep the shoes not deformed.
5, some people like to use electric heaters to bake children's clothes, but often accidentally cause accidents (burning children or fire), should be avoided, use other drying methods.
Glass Beads,Road Paint,Reflective Fabric Glass Bead
Raw Materials,PVC Additives Co., Ltd. , http://www.chpvcadditives.com