I will expose the inside of the manual tile cutter
Crossing manual tile cutters, high quality, good service In China's dusty environment, more and more mason, tile factory, decorator and other work groups use manual tile cutters. The popularity of manual tile cutters is getting higher and higher. With the increasing demand from the market, a large number of manual tile cutter manufacturers have begun to rise, and more and more hardware stores are starting to supply this machine.
As a consumer thinks that buying a cheap machine is the most cost-effective, and for a dealer, agents think that selling a machine can get more rebates is the last word, but the quality is too
The marginal benefits that low machines bring to you are far from what you see in front of you. For the consumer, if you buy back a cheap but quality machine, you will start to have this problem a few times. You will not listen to it, then enter the stage of creaming, and finally scrapped, you can only sell it as scrap. For a dealer agent, selling a machine with a quality that doesn't mean that you have sales. You have customers, don't just look at the immediate interests, sometimes you need to look at the long-term, the machine you sold. After a few times, in the eyes of the customer is just a scrap iron, do you think customers will come to buy other machines in your store? What about your repeat customers? A bad quality of one thing will make more consumers think that the hardware that your home sells is a grade. What is your store reputation? Over time, these will slowly swallow your store like chronic poison.
The difference in quality between manual tile cutters and other products is crucial. First of all, we need to examine whether the marking of the machine is uniform, continuous and clear; these points are the key to whether the tiles can be cut. Second, the bottom plate material and thickness. There are generally two types of cutting machines on the market, one is steel and the other is made of aluminum. Steel material treatment, using 40CR alloy steel, the surface is subjected to high-frequency quenching heat treatment, the hardness reaches 60 degrees, and the bottom plate thickness is 2.0, which is the best and will not be deformed for a long time. The aluminum alloy material is relatively light, and it is best to use the national standard 2.86 thick. The thickness of the bottom plate on the market is 1.0-1.1, which is not recommended. In addition, it is a guide rail. It is best to use a bearing steel guide rail with a hardness of 60 degrees after high-frequency quenching heat treatment. Most of the machines sold in the market use A3 steel, the hardness is only 20 degrees, and a tapping of the iron bar will result in a knock. The bracket also plays a role that can not be underestimated. The common cutting machine on the market is a single process of die-casting aluminum. After only two processes, it is easy to break the cost performance. However, only a few manufacturers use the "hoop" bracket of cast steel. This kind of bracket needs to be machined by a machining center with a value of 350,000. The cost is too high, which is why many manufacturers choose to make low-end products. Finally, the breaker is broken. In the process of using the principle of mechanical lever, the breaker made of No. 30 steel is easy to break. It is better to use 40CR alloy steel, which can lift 20 tons of things. know.
Manual tile cutter, amazing insider you don't know! I hope that you will gain something through this article.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
320W Solar Panel,Mono Cell Solar Panel,Trina Mono Solar Panels,335W Solar Panel
Zhejiang G&P New Energy Technology Co.,Ltd , https://www.solarpanelgp.com