Marine Grade 6063 6061 5754 5083 Aluminium Sheet for Mould
1.Product Descraption :
Alloy  |
AA1100/AA1050/1050A/AA1060/AA1070/AA3003/AA3104/AA3105 AA5052/AA5005/AA5083/AA6061/AA7075/AA8011 |
Temper |
HO,H12,H14,H16,H18,H19,H22,H24,H26,H28,F,H112,etc |
Arts  |
 DC or CC |
Surface |
Mill finihsed & polished |
Thickness |
1.5mm--80Â Â mm |
Width |
300mm-2600 mm |
 Length |
2000mm-8000mm |
Application |
anti-skidding,In transportation, construction, decoration, machinery |
Certificate |
meet GB/ASTM/EN standards, pass ISO9001:2008 quality management system certification and SGS certification. |
Payment terms |
30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight |
Remark |
details can be discussed further. |
2.Chemistry  composition:
5083 Chemistry  composition | |||||||||
Element |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ti |
Zn |
Al |
Standard Value |
≤0.4  |
≤0.40 |
≤0.10 |
0.4~1.0 |
4.0-4.9 |
0.05~0.25Â Â Â Â Â Â Â |
≤0.15  |
≤0.25 |
Remainder  |
Â
| 5052 Chemistry composition  | |||||||||
Element |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ti |
Zn |
Al |
Standard Value |
≤0.25 |
≤0.4 |
≤0.1 |
≤0.5 |
2.2-2.8 |
      |
≤0.15  |
≤0.2 |
Remainder |
5754 Chemistry composition | |||||||||
Element |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ti |
Zn |
Al |
Standard Value |
≤0.4 |
≤0.4 |
≤0.1 |
≤0.5 |
2.6-3.6 |
≤0.3       |
≤0.15  |
≤0.2 |
Remainder |
3.Surface Quality  Â
 your request.Notice: Specific requirement of alloy temper or thickness can be produced asÂ
a. There are no macular or roll marks on the surface of aluminum sheet.
b. There is no water corrosion on the surface.
c.The surface of aluminum sheet  is very clean without lots of impurities.
Â
4.Packaging Details:
a..Wooden Pallet;As Customized, etc
 b. Export packaging fumigation chassis, plank packing paper,
     coil diameter 1.1---- 1.14 meters ,Pad of paper, a variety of wooden pallets
c.Delivery Detail: 15 to 25 days after receiving your deposit or original L/C
d.Export standard wooden pallet packing
5.Factory workshop :
6.Contact information :
Henan XinYu Non-ferrous Metal Co.ltd
Web:www.xyaluminum.com
Â
Phone:86-0371-55083768Â Â Â
FAX:Â Â 86-0371-55685982
MOB:86-173-3717-6360Â Â
Venturi Injector is also called water jet. It is composed of nozzle, suction chamber and diffuser. It is a kind of multi-purpose aeration method developed by using the principle of negative pressure of jet. The unique design of mixing chamber, the strong mixing of water and air, makes the mixing uniform and complete, and produces many and delicate bubbles. The oxygen conversion rate of traditional aeration equipment is generally less than 10%, and the oxygen conversion rate of jet aeration equipment can reach more than 25%.
PVC Venturi Injector, PVDF Venturi Injector, Plastic Venturi Injector
Ningbo RMI Plastic Co.,Ltd , https://www.rmiplast.com