Metric threads, NPT threads, PT threads, G threads are silly and unclear? Come check out this article!
NPT is the abbreviation of National (American) Pipe Thread, which belongs to the US standard 60 degree taper pipe thread and is used in North America. National standards can be found in GB/T12716.
PT is the abbreviation of Pipe Thread, which is a 55 degree sealed conical pipe thread. It belongs to the Wyeth thread family and is used in Europe and Commonwealth countries. Commonly used in the water and gas pipe industry, the taper is 1:16. National standards can be found in GB/T7306.
G is a 55 degree non-threaded sealed pipe thread, belonging to the Wyeth thread family. Marked as G for cylindrical thread. National standards can be found in GB/T7307.
In addition, the 1/4, 1/2, 1/8 mark in the thread refers to the diameter of the thread size, in inches. Insiders usually use the points to refer to the thread size, one is equal to 8 points, 1/4 is 2 points, and so on.
G is the general name of the pipe thread (Guan), the division of 55, 60 degrees is functional, commonly known as the pipe circle. That is, the thread is machined from a cylindrical surface.
ZG is commonly known as a pipe cone, that is, the thread is machined from a conical surface. The general water pipe joints are like this, and the national standard is labeled Rc.
Metric threads are expressed in terms of pitch, and US and British threads are expressed in terms of the number of threads per inch, which is the biggest difference.
The metric thread is a 60-degree equilateral tooth type, the inch thread is an isosceles 55-degree tooth type, and the US thread is 60 degrees.
Metric threads are in metric units, and US and UK threads are in imperial units.
The pipe thread is mainly used for the connection of the pipe, and the inner and outer threads are closely matched, and there are two kinds of straight pipe and tapered pipe. The nominal diameter refers to the diameter of the pipe to be connected, and it is obvious that the diameter of the thread is larger than the nominal diameter. 1/4, 1/2, 1/8 are the nominal diameter of the inch thread in inches.
Thread angle: metric and American threads are 60 degrees, inch is 55 degrees, TM pipe thread is 30 degrees, SM needle thread and BC thread are also 60 degrees, metric trapezoidal thread 30 degrees, inch trapezoidal thread 29 degrees, table thread (TW29 degree TR and TM30 degrees).
Ordinary thread: metric thread M; inch system W; US UNC, UNE, UNEF
Pipe thread: inch PS, PT, PF; US NPS, NPT, NPTF, NPSM
Wind nozzle thread: CTV, TV 1/4-20 outer diameter size is 1A: 0.2367-0.2489 (6.012-6.322); 2A: 0.2408-0.2489 (6.116-6.322) 3A: 0.2419-0.2500 (6.1443-6.350).
Inch thread: Specifications are made according to nominal size and number of teeth per inch
Such as 1/4"-20,3/4"-10, 1"-8, 1/4"-20 means the nominal size 1/4, that is, the large diameter is 6.35mm (25.4 divided 4=6.35), 20 teeth per inch, So on and so forth.
NPT thread size
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com