Seeking tricks and tricks for winter decoration
Winter decoration has many inconveniences. After all, even the experts say: The winter climate is not suitable for decoration, but there is no absolute reason. As long as the cause of the unfavorable factors is found, it can be seen that the winter can also be decorated smoothly.
Yang Yi Doors and Windows Jiangke Doors and Windows
Below, we invite experts to talk about the unfavorable factors and solutions that may be encountered in winter construction.
Cracking and deformation of wood products
Problem: The plates used during the winter decoration are relatively dry, and are easily brittle after being manufactured. In addition, wood products are easily deformed by excessive dehydration.
Solution: Light steel keel instead of wood keel is applied to the ceiling without modeling requirements to solve the problem of deformation of the wood keel;
After the material is brought into the construction site, it should be placed in the room for three to five days so that it can adapt to the indoor humidity, but do not place it near the air outlet or the heating;
After the woodworking is completed, oil should be sealed as soon as possible to prevent evaporation of water.
Wall cracking
Question: After the winter construction, there is a tendency of wall cracking and kicking.
Solution: The designer suggested that the wall treatment should pay attention to the brushing method during the winter decoration. It is better to use a roller brush instead of spraying. Wall treatment usually needs to brush the interface agent, leveling, patching, primer, topcoat and other steps, must be dried before entering the next step, otherwise the wall will appear cracking, drums and other phenomena.
In winter, the outer layer is air-dried quickly. If the putty is too thick, the inner layer is difficult to dry out. The chance of emptying, cracking, and wall inequality will increase in the future.
Thermal expansion and contraction
Question: During winter decoration, due to the sheet being in a contracted state, if the installation is too dense, the sheet will expand when the temperature rises in the summer. If the joints are too small, deformation may occur.
Solution: Winter construction, but also control the joints. The door seam should not be too small, so as to avoid the summer door is tight, can not be switched freely; when laying solid wood flooring, around 2 mm of expansion joints should be left around, otherwise it will cause a drum, dangling phenomenon; on-site to make furniture, need to set aside 0.1 About millimeters of interface seams to avoid deformation; all wood products joints controlled in about 1 mm, gypsum board, cement board seam control in about 8 mm.
If the new house does not have heating conditions, the owner can also consult with the decoration company and divide the construction period into two parts. First, projects such as wall demolition, hydropower reform, and carpentry are not required to have a high temperature. After the spring temperature rises in the coming year, other renovation projects will be carried out. Due to the fact that the construction schedule is longer and the owners need to pay the first period before the start of construction, it is better to choose a reputable brand decoration company and not choose a small company or a guerrilla team to avoid disputes.
Link: Give the child a safe home decoration and leave four hidden dangers
Experience talk lacquer decoration company interior decoration window decoration
Pipe Fitting,Weld Neck Flange,ASME Flange Co., Ltd. , http://www.shflangeforging.com