Three wardrobe installation steps learn to make the installation of the wardrobe easier and more convenient
It is said that women always have less clothes in their closet. In fact, even if they have beautiful clothes, it would be impossible if they did not have a strong and beautiful wardrobe. There are endless wardrobe brands, styles, styles, and sizes on the market. The three-door wardrobe is just as good as the interior space. It does not occupy too much space, but it can store enough clothes. But how to install the wardrobe to buy it? The following three wardrobe installation steps for everyone to introduce in detail.
Three-door wardrobe installation steps First, the overall frame installation
First of all, we must assemble some of the parts, first put down on the left side panel of the wooden cabinet, install three-in-one screws on the holes with rubber, and fix the back brace on the three-in-one screws installed, and then use the three-in-one screws. A fastener is fixed, and then the top plate is assembled. The simple frame is basically completed. Then the bottom plate. We first install the three-in-one screws on the bottom plate, fix the upper corner strip, and then combine the assembled bottom plate and top plate.
Three wardrobe installation steps two, dark cabinet assembly
The dark cabinet assembly is relatively simple, first select all the components needed for the dark cabinet, find the side panel of the dark cabinet, and install the three-in-one screws on the side panel, install the pull strips, and lock the three-in-one fasteners, the panel part Three-in-one screws should be installed first, and then the brace should be installed. Then, the panel should be locked with the three-in-one fasteners on the left and right sides of the dark cabinet, and then a three-in-one screw should be placed on the front brace to set it in the dark. The front and left sides of the cabinet are fixed and fixed.
Three wardrobe installation steps three, assembled drawers and trousers
aã€Drawer assembly: Install three-in-one screws on the reserved rubber hole of the drawer, install the side suction, lock it with two-in-one lock, install the pumping bracket, place it in the bottom plate, lock the tail with the tapping screw Finally, the drawer guides are installed on the left and right sides of the drawer.
b. Pants frame assembly: Install the steel pipe on the trousers and the tail plate, install the three-in-one screws on the two ends of the tail plate, and then firmly fix the left and right side plates of the trousers frame on both sides of the tail plate. Both parts can be assembled as a whole.
Three wardrobe installation steps four, the rest
Put the middle door hinge on the door, lock it with self-tapping screws, and then apply the middle door hinge on all the door parts. Fix all the wooden doors of the three wardrobes with the self-tapping screws on the three wardrobes and use the handles. The self-tapping screws attach the door handle to the door panel so that the three-door wardrobe is basically installed.
Xiao Bian concludes: The above mentioned steps for the installation of the three wardrobes are introduced here. I hope everyone must read them carefully and in detail. This is very helpful to friends who have this need. After all, the closet plays a very important role in the modern home life. How to install it also requires prior knowledge.
Faucets Hose
There are 2 kinds of faucets hose has 2 kinds, flexible hose and shower hose. Flexible hose use to connect faucet to angle valve or water pipe. The thread of joint size may be different in different countries. Other shower hose only has length difference, it often 1.5m or 1.2m hose. These two faucets hose made of stainless steel or PVC.
Stainless Steel Hose,Stainless Steel Flexible Hose,Stainless Steel Braided Hose,Braided Stainless Steel Hose
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handyfaucet.com