[China Aluminum Network] There are two installation methods for aluminum ceilings with light steel keel and wooden side keel, because the wood will be deformed under the influence of temperature and humidity. Over time, there will be large deformations between the various wood sides. Some small, later results are uneven deformation of the ceiling, on the contrary, the installation of light steel keel, because all the materials above the ceiling are metal, a greater limit to reduce the deformation, therefore, the installation of light steel keel The method is preferable.
The cost of the ceiling is composed of three parts: the front is the aluminum ceiling (according to the area of ​​the owner's house, the length of the material); the second is the corner of the material, the general dealer will calculate the number of corners needed according to the specific circumstances; The third part is labor money.
Aluminium ceiling inspection and precautions: aluminum ceiling and its supporting keel are processed by metal sheet. The connection form of aluminum ceiling is insert type. In order to ensure that the connection is flat and loose, the size of the connection structure should be relatively accurate. Smaller adjustment range and higher installation requirements. The installation level directly determines the use effect. Many users say that the purchase of a cheap aluminum plate will cause the problem of convergence between the plate and the keel when it is used less than half a year. Therefore, to remind everyone if the top frame installation is uneven or the keel, aluminum ceiling deformation, in the installation Hard plugs, etc. will cause aluminum ceiling ceiling uneven. Here, we recommend that you buy a brand of aluminum ceilings with good quality and after-sales service.
In order to avoid the uneven appearance of aluminum ceilings, attention should be paid to the following points during the construction process:
(l) The purchased aluminum ceilings and their associated keels and fittings shall meet the product quality requirements and shall not be subject to bending deformation.
(2) During the transportation and stacking process, aluminum ceilings should be kept flat and cannot be pressed, and high temperature and harmful substances should be avoided.
(3) The keel is flat and the spacing deviation should be controlled within the allowable range of 1.5 meters.
(4) When installing aluminum ceilings, if there are deviations in dimensions, they should be adjusted before inserting in order, and they must not be hard-inserted to prevent deformation.
(5) Large lamps, exhaust fans, etc. should be fixed keel alone, should not be placed directly on the aluminum ceiling.
As long as you can pay attention to the above five points, you can basically achieve the solid effect of aluminum ceilings and avoid unevenness. During the construction process, if necessary, observation and inspection may be conducted by means of a ruler, hand test, and the like.
Black Floor Drain,Anti Odor Black Floor Drain,Black Tile Insert Floor Drain,Long Rectangular Black Floor Drain
Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jqfloordrain.com