Specification | Name: 6000 series Aluminum Sheet | |||||||||||
Alloy:Â 6061, 6082, 6063Â etc. | ||||||||||||
Temper: O, H112, T4, T6, T651Â etc. | ||||||||||||
Thickness:Â 6-200mm | ||||||||||||
Width: Up to 1500mm | ||||||||||||
Surface treatment: mill finished, Print marks | ||||||||||||
Feature | Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper. | |||||||||||
Forming:Â Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods. | ||||||||||||
Welding: It has very good welding characteristics and may be welded by all of the common welding techniques. | ||||||||||||
Heat Treatment:Â Solution heat treat at 990 FÂ for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 FÂ for 18 hours and air cool, followed by 350 FÂ for 8Â hours and air cooling. | ||||||||||||
Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F. | ||||||||||||
Hot Working:Â Hot working may be done in the temperature range of 700 FÂ to 500 F. | ||||||||||||
Cold Working:Â Cold working in the OÂ temper condition is readily performed. The alloy is notably less easy to cold form in the TÂ 4 and TÂ 6 tempers. | ||||||||||||
Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool. | ||||||||||||
Aging:Â The aging precipitation heat treatment is done at 350 FÂ for 8Â hours followed by air cooling. This produces the T6 temper. | ||||||||||||
Application |
Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc.  |
|||||||||||
Alloy | Chemical Component %≤ | |||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | others | Al | ||
single | total | |||||||||||
6061 | 0.4- 0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8- 1.2 | 0.04-0.35 | \ | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
6082 | 0.7- 1.3 | 0.5 | 0.1 | 0.4- 1.0 | 0.6- 1.2 | 0.25 | \ | 0.2 | 0.1 | 0.05 | 0.15 | remainder |
6063 | 0.2- 0.6 |
0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | \ | 0.1 | 0.1 | 0.05 | 0.15 | remainder |
Contact | Ms. Sunny Mao |  | Mobile:86-18660566415 |
Our B22 connector T-bulb light is made of pure PC material. T-bulbs use non-isolated driver and the voltage is 170-300V. The T-shaped shell and turnable axis are the unique features of T-bulbs. It has 10 watt power and its CRI is more 80, luminous efficiency is 80LM/W. The color temperatures include cool white, warm white and natural white. This type of bulbs light is in elegant shape, easy installation and good quality. These T-bulb lamps have a two-year warranty, mainly used in office, bedroom, supermarket and so on.
Connector B22 Led Light,T-Bulb Light,Led Linear Lights,30 Watt Type T Bulb
Jiangmen Lika Lighting Electrical Appliances Co., Ltd , https://www.lika-led.com