With the wider application of LED displays in the market, many consumers often overlook the daily maintenance and maintenance of full-color LED displays, so that long-term use not only affects the user's visual experience, but also the life of the display will be greatly reduce.
As a long-term outdoor full-color LED display, it has become a major protection product, because in the external environment, it is vulnerable to all kinds of rain and snow weather, especially for LED display screens, need regular maintenance, to avoid other failures.
How to maintain the LED display 1, the power supply is stable, good grounding protection!
2. Never use it under harsh natural conditions! (such as strong lightning weather, etc.)
3, the screen is not allowed to enter the water, iron powder and other conductive metal. The Led display screen should be placed in a low-dust environment as much as possible. Large dust can easily affect the display effect. Excessive dust can damage the circuit.
4, due to various reasons for water, please immediately power off and contact maintenance personnel, until the screen body display panel can be used after drying.
5. The surface is covered with dust. Remove the dust with a feather duster and wipe it with a clean rag. (The operation should be gentle and can not be forced to prevent the screen body from falling off)
6. Normally use a clean, rag-free cloth, and wring out with water. Try to avoid using too hard or rough cloth or dirty cloth to prevent damage to the product surface.
7. It is recommended that the LED display should have a daily rest time of more than 2 hours. During the rainy season, the LED screen should be used at least once a week. Normally, the screen is turned on at least once a month and lighted for more than 2 hours.
8, led display need to regularly check whether the normal work, whether the damage to the line, if not to be replaced in a timely manner, the line has to repair or replace the damage.
9, do not play for a long time in the full yellow, full red, full green and other bright screen, so as to avoid excessive current, power line heat is too large, LED lamp damage, affect the display life. Never disassemble or splicing the screen!
10, LED display internal lines, non-professionals are forbidden to touch, so as to avoid electric shock, or cause damage to the line; if there is a problem, please consult a professional.
11. Every two months, check whether the external organic glass plate is loose. Whether the transparent tape at the interface is detached or not, if it is found that the plexiglass plate is loose, it should be handled in time to prevent the board from falling and hurting people. Scotch tape should be re-adhesive if it falls off to prevent rain from entering the screen.
Environmental Protection Equipment Hose
Clear Pvc Hose,Dust Extraction Ducting,Environmental Protection Hose,High Temp Flexible Exhaust Hose
Changxing VACUFLEX Hose Technology Co., Ltd. , https://www.vacuflex-cn.com