Renovation of the house detailed steps to decorate the house's precautions
The newly purchased house needs to be renovated before it can be accommodated, so we need to carry out the next step of decoration design after buying a good house, but there are many types of decoration styles, but the steps are almost the same, then the house decoration details What are the steps ? What are the precautions for decorating the house? Let's introduce it to you by the small series of the decoration home network.
First, the detailed steps to decorate the house
1. The house is the harbor that we parked after a day's journey. It occupies an extremely important position in a family. It is also the soul of the steps we started to renovate the house. It directly determines the final shape of the house. Therefore, an excellent pre-housing design is crucial.
2. When the framework appears, we need to fill things inside, but Xiaobian's so-called filling is not anxious to move the appliance, but to carry out hydropower line transformation, tiling, wall painting. This will deal with these first, and then it will be easier to install appliances such as range hoods. After the kitchen tiles are finished, you can go through the wall painting and paint the furniture.
3. Between the two aspects of hydropower transformation and main body demolition, some rookies may know that the first measurement of the cabinet should also be carried out. In fact, the so-called cabinet measurement did not have any actual content. Because the wall and the ground were not treated, the cabinet designer could not give the specific design size, but only the water outlet and the hood socket reserved by the developer. Location, make some relevant suggestions.
Second, the considerations for the decoration of the house
1. New house decoration is not an easy task. It not only takes a lot of time and money, but also requires a lot of things in the decoration to ensure the quality of the decoration. The first step of the renovation is the main body transformation. Before you hit the wall, you must first understand what is the load-bearing wall in the room. The load-bearing wall cannot be smashed, otherwise it will cause safety hazards. In addition, everyone should also reasonably arrange the time to smash the wall, otherwise it will cause inconvenience to the lives of others.
2. Before the workers enter the scene, it is better to measure the corners of the home and measure them yourself. Write down the pen ruler and mark it clearly. Be sure not to be lazy. The contents of the measurement mainly include: First, the area involved in the decoration process, especially the tile area, the wall paint area, the wallpaper area, and the floor area; the other is to define the main wall size. In particular, it is necessary to design the wall size of the furniture in the future.
3. In order to save renovation costs, some owners will buy some cheap materials to seal the balcony. This is not advisable and is likely to cause safety hazards. Therefore, everyone should try to use a better material when sealing the balcony. For example, plastic steel window, aluminum alloy window, broken bridge aluminum window are very good, and it is also the mainstream material.
The decoration of the house needs to be understood first. What steps are required to be prepared in advance? What are the detailed steps and precautions for the massage and decoration house? I want to read the introduction of the above small series. Everyone knows about these. If you still want to know more about decoration information, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
Renovation of the house detailed steps to analyze the decoration of the house precautions
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com