SDS card ticket show sign

1, plastic envelope card film

Product application: It is mostly used for large-scale hanging type badges, and is widely used in large-scale events and meeting places, such as 08 Olympic Games badges. Guangzhou Asian Games, Incheon Asian Games and other venues access documents.

Channels for certification: use by the security management department.

Method of use: The thermoplastic sealer is used to sandwich the documents into two front and back plastic film and then put into a plastic laminator to heat and compound (each set consists of two heat sealable optical films).

Product features: The system is flexible in size, easy to use, and has a low quantitative requirement. It is suitable for short-term certificates.

Product specifications: A4 any size below multi-piece box

Use equipment: ordinary commercial plastic sealer

2, card type thermal transfer film

Product application: It is used for standard size card-type certificates, bank cards, and point-of-use, such as: *****, Taiwanese card, etc.

Channels for certification: local public security entry-exit certificate management department, large-scale enterprises and institutions security management department, banking system outlets

Method of use: The personalized information printed card body is heated by special card transfer equipment and anti-counterfeiting film, then the substrate is peeled off, and the transparent optical anti-counterfeit information layer is directly transferred on the card.

Product features: After leaving the base film without leaving, the optical security layer and the size of the card surface completely consistent, very beautiful, can not completely peel off the coverage of a good anti-counterfeit information layer, to play a role in protecting the card body printing information.

Specifications: The finished product is supplied in a single roll with 400 rolls per roll.

Equipment used: special card laminating machine

3, card certificate heat film

Product application: It is used for standard size card certificates, foreign driving licenses, and personal certificates.

Channels for certification: The vehicle management institutes in various places, security management departments of enterprises and institutions.

Usage method: pre-punched and arranged on the release film on the card security film, through a special card transfer device will be anti-counterfeit film positioning heating paste on the card surface of the card is completed,

Product features: It is an anti-counterfeiting protective film with a base film card, covering the perimeter of the anti-counterfeiting film less than 1 mm around the card body, and it can have strong scratch resistance.

Product Specifications: The finished product is supplied in a single roll with 100 rolls per roll

Equipment used: special card laminating machine

4, this type of document thermal transfer film

Product Application: Single-page documents for signing records, on behalf of the product**, etc.

Channels for certification: Exit and entry management system of public security organs in various regions

How to use: Manually open the printed personal identification page. Some countries’ large-scale production outlets will automatically open personal pages and put them into the hot-press conveying equipment. The anti-counterfeiting film and this type of document protection page will be hot-pressed and composited to complete the peeling of the substrate. Finished form sheet protection film.

Product features: After the protective film only retain the transparent anti-counterfeit coating, with strong personal information tamper-proof function

Product Specifications: The finished product is supplied in a single roll with 400 rolls per roll

Use equipment: Special-purpose document hot press laminator, plastic sealer

5, printable document with thermal transfer film

Product Application: This type, card type certificate, on behalf of the product Maritime Safety Certificate.

Channels for certification: management agencies

Usage: Mirror the personalized information on the anti-counterfeiting film on the backing paper, and then align the printed anti-counterfeiting film with the blank page of the certificate, and then heat and roll it through the heat sealing machine. The base film material is peeled off. At this time, the transparent optical security layer and personalized print information are completely transferred on the surface of the document.

Product features: Easy to use and flexible, information protection is safe and complete. The film surface contains special coating to print personalized information. Can be suitable for general printer printing.

Product Specifications: The finished product is a single-page multi-sheet, A4, etc. is suitable for the printer size.

Use equipment: special certificate hot pressure laminating machine, plastic sealing machine

6, card cold foil

Product application: For standard size card type certificates, foreign personal card type certificate

Channels for the production of licenses: Provisions for counterfeit coverage in the field of non-power environment

How to use: Unfold the release film from the corner of the anti-counterfeiting film that has been pre-punched into the card body size. Then align the card body with the tip of the peeling film. Then peel off the film and apply the card body until the entire sheet is removed. The card is covered with a security film.

Product features: It is an anti-counterfeiting protective film with a base film card. Covering the area around the anti-counterfeiting film is less than about 1mm around the card body. It can have a strong scratch resistance and is easy to use and flexible.

Product Specifications: The finished product is supplied in a single roll with 100 rolls per roll

Use equipment: hand-applied, or use card card laminator does not heat cold roll

7, card laminated film

Product application: used for laminating manufacturing of card certificates, common in ID cards, bank cards, cards, transportation vehicles, etc.

Channels for production: for the mass production of card factories

Use method: According to the size of the card typesetting, provide the same layered and laminated anti-counterfeiting film as the card body material (PETG, PVC, PC). The large-scale laminating equipment used for the card factory is laminated together with the card body and the chip. The general graphic and text information is then printed. After the completion, a single card is punched and provided to the card making point for personalized authentication.

Product features: Anti-counterfeit information is embedded in the card body, which is safe and reliable, and can only be used by the card factory.

Equipment used: Large-scale laminating equipment for card factories

8, printable paper documents hot stamping labels

Product application: used for single paper certificates, this type of documents, for **visa paper, title certificate, business license, etc.

Channels for certification: Visa departments of consular authorities of various countries and units of issuing agencies for issuing licenses

How to use: Place the pre-finished hot stamping label by positioning the hot stamping device, then hot stamp it onto a single sheet or this type of document, and then print the personal information with a laser printer to make the document.

Product features: It is a kind of anti-counterfeiting stamping label with high security against imitation. It has good high temperature resistance after stamping and can withstand the high temperature printing of laser printing equipment.

Specifications: The finished product is supplied in a single roll with 3000 rolls per roll

Use equipment: positioning hot stamping equipment

9, certificate cold plastic film

Product application: It is mostly used for large-scale hanging type badges, and is widely used in large-scale events and meeting places. It is commonly used in national elections to prevent tampering

Channels for certification: use by the security management department.

How to use: Put the ballot paper into the center of the anti-counterfeiting film that is pre-punched to the required size, and then peel the cover body away from the film, and then cover the card body until the whole ballot cover covers the security film.

Product features: The system is flexible in size, easy to use, and has a low quantitative requirement. It is suitable for short-term certificates.

Product specifications: A4 any size below multi-piece box

Use equipment: No special equipment or simple laminating equipment