Wood keel ceiling five steps installation method decoration white can learn ceiling installation

The most involved in the woodworking phase is the installation of ceilings, which shields objects such as water pipes and beams, making the space more visually appealing. The wooden keel ceiling is the most common way of ceiling construction. How is it going to be constructed? Today, we will take a look at the wooden keel ceiling introduction.

Wooden keel ceiling - determine location

Before carrying out the wooden keel ceiling, it is necessary to accurately measure the ceiling position, because only after the position is determined, the ceiling will be installed and it will be visually comfortable. First, the elevation of the ceiling needs to be performed first. After the installation height is determined above the walls around the space, a percussion drill is used to perform the drilling at the top of the horizontal wall. Generally, a square drill bit size of 1.2 cm is used. Note that in order to ensure the stability of the ceiling, the distance between the holes should be kept at 30 cm. After the elevation of the wall is done, it is necessary to perform spring lines around the walls of the space to facilitate the precision of the ceiling position. This operation will allow the error to be controlled within five millimeters.

Wooden keel ceiling - keel assembled

Before the wooden keel is suspended in the ceiling, it needs to be assembled on the space ground. The area is generally no more than 10 linings. Assembling and selecting the method of half-zen clinching is actually to slot the wooden keel, assembling the notch between the keels, and applying a special glue evenly in the notch, and using a nail to fix it.

Wooden keel ceiling - fixed keel

If the assembly is correct, we then need to fix the wooden keel. Since the corners of the overall ceiling need to be sealed, this link is very important and we must not be sloppy.

Wooden keel ceiling - line position

After fixing the keel, it is necessary to draw the position line of the wooden keel. This is to facilitate the determination of the number of tiles needed for the ceiling, and then to determine the overall ceiling effect according to the number of tiles needed, but it is necessary to consider these aspects of edge sealing.

Wooden keel ceiling - installation construction

During installation and construction, the hangers we install should have good bearing capacity. When using welding processes, we need to be more meticulous, and the hangers are welded more evenly and look beautiful. In addition, anti-rust treatment should be performed on the ceiling to make the ceiling use longer.

Wooden keel ceiling - correction work

Followed by the correction work, the position of the primary and secondary keel of the ceiling shall be properly adjusted so as to determine the rationality of the position of the integral ceiling. It can also be properly moved to adjust the final overall effect of the ceiling. Here, almost wooden keel ceilings are roughly installed.

With regard to wooden keel ceilings , Xiao Bian introduced it here for the time being, hoping to help you. If you want to learn more about ceiling related knowledge, you can pay attention to this site information, more exciting content waiting for you.

Ceiling wooden keel ceiling

Welded mesh panel including:

stainless steel Wire Welded Mesh Panel

hot dip galvnized after welded

electric galvanized before/after welded

PVC coated welded mesh panel

Wleded mesh panel characteristics:

flat even of surface, mesh aperture equality, firm structure, Anti-erosion, Anti-aging, Anti-sunburn

Welded mesh panel application:

it is widely used in express way, rail way, airport, habour, municipal  construction and animal husbandry for protection. On the new type building that is best choose of material for thermal insulation and isolation.

Welded mesh panel specification:

material: black wire, galvanied wire, stainless steel wire

wire diameter: 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm

mesh: 25*25mm, 50*50mm, 50*25mm, 75*50mm, 100*100mm

width: 1m, 1.2m, 1.5m, 1.8m, 2m, 2.5m

length: 1.2m, 1.8m, 2m, 2.4m, 3m, 4m, 5m, 6m

Welded mesh panel

Reinforcing Mesh Panel,Welded Wire Mesh Panel,Wire Mesh Fence Panel,Welded Mesh Panel

Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl