How to do the United States seam floor tiles? What to pay attention to the beauty of the seam
US grout is an item we often use when laying tiles. It makes the gap between each tile become more beautiful, so that your interior space becomes more beautiful and comfortable, then how to make beautiful tiles What? What to pay attention to the beauty of the tile? This article will introduce you to the next.
How to make a beautiful seam
1, first need to clean up the gap of the tile, use a beautiful sewing cone to shovel the tile joints out of a groove of about 2mm, so that when making the beautiful seam of the floor tile is more adequate, the paste area is also relatively large, not easy to appear off phenomenon . The gap between the tiles must be cleaned, and it is best to clean the dust inside, so that the US sizing agent will be used for a long time.
2, then the United States to open the mouth to open the joint, the United States and the need to smaller sewing agent exports, so that we can ensure the uniform discharge, and then install it on the glue gun, after the extrusion of the waste nozzle installed , Then according to the size of the tile seam, then use a US knife to make a side incision.
3. Install the US sizing agent on the glue gun, remove the nozzle of the US sizing agent, and then install the discharge nozzle. Cut the angle of 45 degrees along the thick ribs with scissors and let the material be discharged. The width of the mouth is the same as the width of the tile. It is best to allow the discharge nozzle to fully enter the tile seam.
How to make two beautiful tiles
4. When using the US sizing agent, it is necessary to use the bottom of the sizing agent first, and the effect of the sew joint made in the smooth gap is even more outstanding. Therefore, after the screed is solid, we can use the glue gun to apply the US sizing agent.
5. It is necessary to wipe out the excess material with a wet sponge before it is solidified because it is difficult to remove after solidification.
6, with a sponge to clean up the last more beautiful grout, US grout is usually quick-drying type, so we use up to 50cm after a wet sponge to be used to remove the US grout agent, or stick to the edge of the tile Will affect the effect.
What to pay attention to the beauty of the seam
1, choose a good tile filling material
At present, there are three kinds of caulking materials on the market: white cement, putty powder, and US grout. Among them, white cement and putty powder will have insufficient performance and poor waterproof effect. Therefore, it is recommended that you choose the best grout. , Its excellent performance, can completely solve the problem of dirty black tile joints.
2, caulk pay attention to time
The beauty of the tile work needs to be performed 24 hours after the tile is finished. Therefore, the tile is not firm enough after the tile is finished. If the seam is directly applied, it can easily cause problems such as the displacement of the tile.
The article concludes: The above is about how to make beautiful tiles and how to do it, and how to do it . We hope to give you some help, so that you can understand how to make beautiful tiles, and you can make ceramic tiles beautiful and bright.
Stevia Powder,Stevia Leaf Powder,Mint Stevia,Stevia Sugar
JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com