Slurry pump in the installation need to pay attention to some issues, if not properly installed will affect the operation, and even endanger our production safety. Below for everyone to pay attention to the installation of slurry pump considerations: 1) must ensure that the slurry pump steering and the bracket on the direction of the arrow indicated. The motor must be completely disengaged from the pump during the test run, and it is strictly prohibited for the motor to rotate the pump shaft in the opposite direction. Otherwise, the parts will be damaged. 2) Packing sealed pump, drive must be added before packing. 3) The use of mechanical seal pump, shaft seal water supply must be guaranteed. Do not run dry, or mechanical seal will be burned. 4) The use of thin oil lubrication pump, the pump should be opened before the oil level oil refueling. No oil-free driving, otherwise, the bearings will be burned. We must keep in mind the above considerations for the installation of slurry pump in order to ensure safe and secure operation of production.