Maintenance and maintenance techniques for cork flooring

Now more and more families use cork flooring in the decoration, but how to maintain the cork flooring has always been a headache for netizens. The following five tricks will help you easily manage the cork flooring.

If it is worn after three or five years, it can be partially compensated, that is, the coating is re-applied at the local part. The method is very simple. Gently sand the sand at the worn place to remove the scale on the surface, and then Wipe gently with a soft, dry cloth, recoat the coating, or apply a polyester film to the area.

For the surface painted cork flooring, the maintenance is the same as that of the solid wood floor. Generally, the floor wax can be used once every six months. Cork flooring with a resin-resistant layer on the surface is as simple as a composite floor.

Prevent heat damage. Do not place hot objects such as hot water cups directly on the floor to avoid scalding the surface paint film. At the same time, it should be avoided to expose the sun to the floor for a long time, so as to prevent premature cracking and aging after the paint film is exposed to ultraviolet light for a long time.

It is only after 24 hours of floor installation that the furniture can be placed on the floor and the movement of people on it is minimized within 24 hours. When leaving home, please close the window, door, especially the faucet, so as not to let the rain or drip soak the floor.

The maintenance of cork flooring is easier than other wooden flooring. During use, it is best to avoid the sand being brought into the room, with some sand particles being brought in and not wearing the floor. Because the sand is pressed into the elastic layer under the foot, it will be ejected when the footsteps leave. Of course, it should be reminded here that it is not advisable to bring in too much sand, which will still cause flow wear. Therefore, the sand that is brought into the room should be removed in time. Generally, there is no need to equip the vacuum cleaner, and there is no need to worry about the warpage, mildew, etc. phenomenon.

It is recommended to place a foot pad at the door to reduce the abrasion of the sand on the floor. It is only after 24 hours of floor installation that the furniture can be placed on the floor and people should be prevented from walking on it within 24 hours.

Do not rinse, polish or clean with a decontamination powder when maintaining the floor. The maintenance of the surface painted cork floor is the same as that of the solid wood floor. Generally, the floor wax is used once every six months; usually, it is only necessary to use a wringed mop or a rag to wipe. Places that are difficult to clean are removed with a special cleaner. Avoid strong impact on the floor, carry furniture to lift, and can not directly drag, furniture legs need to pad.

If it is used in a place with a large flow of people, if there is wear and tear in some places after three or five years, it can be partially compensated, that is, the coating is re-applied at the local part. The method is very simple, and it is lightly sanded at the worn place to remove it. The dirt on the surface is then wiped clean with a dry soft cloth, repainted, or partially covered with a polyester film.

In addition, cork flooring can be made into different patterns from different colors of different tree species. For example, there will be various patterns on the NBA court.

Cork flooring is used for wall decoration or for the maintenance of cork wall panels:

1. Use a vacuum cleaner, tweezers, and a semi-dry rag;

2, local stains can be wiped with an eraser, can not be used to remove the sharp weapon;

3. If it is a waxed wallboard, wipe it off with a damp cloth.

roller cones Core barrels include steel tooth cutters Core Barrel and TCI cuttres core barrel are used to cut an annular ring in rock or concrete or reinforced concrete. The centre core of the rock or concrete is usually crushed with rock auger. The most important advantage of a core barrel is that it assists to concentrate the torque and crowd force on a small ring of cutting teeth.

Core barrel with roller bits /Core Barrel With Roller Cone / replacement cones core barrel Applicable for very strong rock formations with compressive strength greater than 100Mpa

CORE BARREL WITH ROLLER BITS TECHNICAL DATA

Core Barrel With Roller Cone

Core Barrel With Roller Cone,Hard Rock Core Barrel With Roller Cone,Core Barrel With Roller Cone Bits

Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , http://www.welldrillingbit.com