Non-metallic
The non-metallic wear-resistant floor is composed of selected aggregates, high-strength cement, special admixtures, pigments and polymers with a certain particle size grade. The dry-distribution method is used to evenly spread the concrete surface in the initial setting stage. With a professional construction tool, a dense colored wear-resistant surface layer can be formed on the foundation concrete. There are 4 kinds of wear-resistant hardeners (cement color, gray, red, green), which have the advantages of good bonding performance with foundation concrete, dense surface, high wear resistance and good impact resistance. Can be widely used in shopping centers, large supermarkets, sidewalks, parking lots, production workshops, machine repair workshops, warehouses and other places that need to enhance the surface wear resistance, can be used indoors and outdoors, even if it is wet for a long time, it will not affect it. Performance. According to the requirements of the wear layer of the ground (1.5-3.5mm), the recommended dosage is 5-7kg. Main technical indexes of quartz sand-type wear-resistant floor system: 28-day bending strength 12MPa 28-day compressive strength 85MPa Surface hardness, mm (indentation diameter) 2.8 Wear resistance ratio 300%
Metal type
The metal-type wear-resistant floor is composed of selected aggregates, high-strength cement, special admixtures, pigments and polymers of a certain particle size grade, and is uniformly spread on the concrete surface in the initial setting stage by a dry dispersing method. With the construction of professional construction tools, a layer of extremely dense, high-strength colored wear-resistant surface layer can be formed on the foundation concrete. The wear-resistant hardener has 4 colors (cement color, gray, red, green), which has the advantages of good bonding performance with the foundation concrete, dense surface, high wear resistance and strong impact resistance. It can be widely used in concrete surfaces that need special surface abrasion resistance and impact resistance, such as production processing workshops, machine repair workshops, warehouses, etc. The disadvantages are that it is not suitable for the ground in long-term humid environment, and often contacts acidity and crystallization. Ground for salt and other chemical solvents. According to the requirements of the ground wear layer (1.5-3.5mm), the recommended dosage is 5-12kg.
Seamless Steel Door,Metal Door ,Hollow Metal Doors ,Fire Rated Door Frame
Wooden & Timber Door Co., Ltd. , http://www.steeldoor-manufacturer.com