What are the production processes for tempered glass in shower rooms?
The shower room is a kind of bath design that is often seen in modern home bathroom decoration. The main materials selected are tempered glass and aluminum alloy, and the safety needs to be guaranteed. Therefore, the quality requirements of tempered glass are very high. The production process is an important factor affecting its quality. What are the production processes of the tempered glass in the shower room?
There are two processes for producing tempered glass:
One is to process ordinary flat glass or float glass under specific process conditions by quenching or air-cooling quenching.
The other is to process ordinary flat glass or float glass by ion exchange method, and change the surface composition of the glass to form a laminated stress layer on the surface of the glass.
Tempered glass has high impact strength (4 to 5 times higher than ordinary flat glass), high bending strength (5 times higher than ordinary flat glass), good thermal stability, smooth and transparent, and so on. In the case of super-strong impact damage, the fragments are scattered and fine particles, without sharp edges and corners, so they belong to safety glass. In order to ensure that people do not have safety problems in the process of using the shower room, it is recommended that the majority of owners should choose a regular enterprise to purchase tempered glass, but don't want to be cheap!
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Melamine Particle Board is mainly used for furniture and carriage of bus, train.The bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.Melamine paper is the most popular to be as the face board, it is abrasion resistant, heat resistant, fouling resistant, clean is simple.The Engineering wood is also as the face and back surface. It is more cheaper and beautiful, can reach the same wood grain effect as the veneer surface.And we have High Quality Particle Board .LULI Group Co. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Plywood , venner, MDF, Particle board , Door skin , Blockboard , Finger joint board, OSB, paper, Steel etc.And we have Outdoor Melamine Particle Board.
Melamine Particle Board Details:
size:1220*2440MM 1250*2000MM 1525*2440MM 1830*2440MM
THICKNESS:9MM-40MM
MATERIAL:POPLAR, COMBINE, PINE
GLUE:E0, E1, E2
CERTIFICATION:CARB, FSC, CE
Melamine Particle Board
Melamine Particle Board,Melamine Faced Particle Board,Outdoor Melamine Particle Board,Melamine Laminated Particle Board
Luli Group Co.,Ltd. , https://www.plywoods.nl