Let me talk about how to buy the highest quality, lowest price building materials. Through those network pathways:
1: more to irrigation, collect quotes
2: Pay attention to the decoration activities inside the jar. General participation in the activities of businesses are the general generation and manufacturers. To lay the information foundation for subsequent purchases.
3: Active participation in decoration procurement activities. The bubble packer's long-time attire knows that the most favorable is the concentrated sale of the same property. b. The price of concentrated group purchase in different real estates and different places is slightly higher. c The highest price for a single purchase.
Businesses often give the number of households how much discount, through this point you can see the bottom line of the business. Collectively bargaining activities often less than the number of businesses in the event took a staggered position to pay the gun to promise the bottom line price. This method is convenient and quick, and you don't have to worry about slaughtering.
4: Businesses that do long-term business in the home network are more concerned with reputation, and if there is a problem, there will be consequences for people pushing the wall. Collective buying helps constrain.
5: Do not blindly follow the wind construction articles:
Remind the rider to visit his construction site before signing the contract. Only during the construction process can you understand whether the team you are going to hire is well-trained or "wholesale."
Personally I think that it mainly depends on the placement of materials, the staffing, the coordination of workers, the management of on-site foremen, the degree of construction standards, and the skills of workers.
It is the key to the first three days when the construction team enters the site. At this time, it is best to focus on the construction site.
The first thing that came in was not a work. We often saw that at a certain construction site, the gate opened and the workers swarmed in. At this time, the feeling on the spot is a mess. A well-trained construction team should be like this: First, to enter the site's first job, the site management personnel arrange for the construction work site for all the attendants. Such as on-site precautions, equipment to be protected, protective measures taken by hydropower pipelines, protection and treatment of doors and windows, etc., all require managers to emphasize on the construction site all the equipment needed to be dismantled and arrange them to specific people. During the construction period of each project in the first phase, relevant personnel should be aware of it. Therefore, the first job for construction workers to enter the construction site should not be work.
“Landscape Oil†is not available for a decoration company with a relatively high management level. Its construction personnel should be tile, wood, oil, water, electricity and small workers. The types of work are complete, the equipment is complete, and the professional construction level is high. Such company construction does not There will be the phenomenon of “three workers do one project, what work will be done, and what work will not be doneâ€. A better project, its workers are constantly changing. It may be that on such construction sites, carpenters who do doors, carpenters who work as heating covers, and carpenters who work on ceilings do not necessarily have to be a group of people. Workers who paint paint and workers who paint may change, and tiled workers go to paving tiles. At that time, I changed another person. What needs to be understood is that if a worker can use bricks, wood, oil, water, and electricity all in one fell swoop, if the worker in the first three days still removes the trunking from the wall and later pushes up the wood plane, then Look closely. The home improvement project is the most taboo of the “all-oil†type of person.
The on-site protection is indispensable. Most home improvement sites do not require that the house be disassembled into an empty shell. There are more or less equipment that needs to be kept. If protective measures are not taken against these devices at the beginning of construction, the possibility of damage during construction will increase.
First, the meter box should be wrapped in a small wooden box made on site; the upper and lower water pipes should be clearly marked to warn the construction personnel to pay attention to protection; the open sewage nozzle can be plugged with a wooden wedge whose diameter is larger than the gate. Wrap it in a woven bag or plug it with a softer material such as polyphenyl foam. However, we have seen that the protection of home improvement sites is seldom valued.
Demolition work should be "random and orderly"
The feeling that most home improvement sites give to consumers is first of all confusion. Random dismantling, random placement, and random throwing became the scene when the home improvement construction team just entered the stadium. A well-trained construction team, in the first three days after entering the construction site, the workers systematically carried out the demolition work. From inside to outside, from top to bottom, it was necessary to put in garbage bags to break the garbage into small pieces, which could be bundled in The construction waste along with straightening will be straightened. The wooden products with nails will be knocked down by the workers or hit with a hammer. The removed construction garbage will be placed together at any time. There is no visible rubbish on this kind of construction site, and there is no need to worry about walking on such a site and it will be worn by nails and other sharp objects.
Waste disposal affects many construction wastes that were removed from the construction team in the early stage of the site. If they are handled improperly, they will have more or less adverse effects on the later construction. From the first day of the construction site to the end of the project, the construction workers did not clean the garbage once, and the garbage was not bagged and piled up all over the place. As soon as people walked, the road was dusty. At the end of the project, it was discovered that the paint on the surface of the wood product was covered with dust and rubbed away. When paving solid wood flooring, where the keel is hit, the garbage on the ground is pushed aside, resulting in a lot of dust below the floor being sealed below. The more turbulent the decoration company is, the less attention is paid to waste disposal.
Home decoration must be handled well with construction waste, and it should be cleaned at any time. Doing so can keep the site clean, giving the construction staff a good working environment, avoiding accidental accidents caused by garbage disposal, and providing project quality assurance for later construction. For example, the construction of paint and other projects must have a clean environment. To ensure the quality of construction, it is only when the garbage is disposed of properly that the occurrence of similar construction waste can be prevented from clogging the toilet water pipe.
Experience: 1. Don’t believe that friends of relatives and acquaintances are introduced by the netizens. Really seeing whether or not the material they have managed to live is reasonable and organized. Then they listen to the opinions of users and are the best.
2. It is best for workers to know or collaborate. Because the whole project needs them to coordinate with each other, if each type of work is done individually, after the completion of the entire project, you will not be satisfied. How do you look at the model house in the worker's craft on the construction site, and implement the skill of the construction worker before signing the contract?
3: Look at the work and construction schedules on the wall for foremen.
4: There are no realm-type figures. Clear division of labor.
5: Whether the foreman is working hard in the construction site and how many households in the community are concurrent
6: If appropriate, find the foreman through the workers and decorate it.
7: Do not rush to start work after setting the project goals. It is best that you want to go to the furniture market to be optimistic about the furniture and flooring you may buy, so that it will be helpful in the overall design, wiring, and color matching.
Purchasing articles of cabinets & custom furniture decoration building materials industry cabinets & custom furniture complaints are seen almost daily in the jars. Because cabinets & custom furniture are not better than other building materials and appliances. Due to the scale, design, coordination confirmation, installation, and other processes involved, it is easy to have problems. Long spans, cabinets are often scheduled for occupation, and finally installed. Customization time is about 20 days. This bad time plan directly affects the subsequent construction.
Need to go through the following process to determine:
Whole cabinet ordering process
1. Visit the brand
2. Preliminary design quotation
3. Onsite measurement
4. Professional kitchen cabinet designer
5. Discuss the overall kitchen solution with the customer
6. Determine the program (volumes related to range hoods, size of sterilizers) Kitchen 3-piece set My own bought Schindler + Ruixin + Anjia is still very much recognized
7. Provide customers with water, electricity, gas, electrical socket "hydropower layout" (involving hydropower reform so it is best to settle before the occupation)
8. Visit the site again to review the size and implement the customer has been in accordance with: water and electricity layout drawings "Completed the pre-construction.
9. Appointment installation time
11. Delivery installation
12. Customer acceptance and verification
13. After-sale maintenance I will focus on how to examine the brand:
Cabinets are the most frequently complained branch of the building materials industry. There is hardly any brand cabinet that does not have any problems. Concentrated in services, materials, environmental protection, warranty, payment methods, communication between cabinet makers and owners, scales. If you see complaints about materials and environmental protection in the jars, pay attention to the complaints. . This is the hardware if it is a problem of service, payment method, and communication. Businesses are sincere to solve basically no problem. This is software.
Look at the cabinets to see if fame is just a surface.
Personal opinion: There are materials and environmental complaints. Put aside the complaints on services, payment methods, and communications to see the results. Dealing with the inclusion of alternative online word-of-mouth is a good alternative.
Begin to compare the strength of the factory equipment: cutting with a complete machine, automatic sealing, automatic hole manufacturers cabinets. Alternative hand workshops, semi-active edge seals, OEMs and other uncontested cabinet brands. Let's go ahead and compare materials and environmental protection. The material is nothing more than a countertop + cabinet + panel, because the choice range from low to high-grade expertise is not enough to distinguish. The following cabinet configurations are recommended to compare prices in the market:
Monterey Milan stone countertops (domestic DuPont, DuPont company produced, the cost is higher than the cabinet gem, L'Oreal, etc.)
West Germany fire protection panel (best moisture, fire, scratch resistance, imported board. The best material in the fire board)
Hettis hinge hardware (hardware top, high cost)
18cm e1 moisture-proof board (environmental protection, some businesses use 16cm to save costs)
The above standard market is mostly around 1400-2000.
Use this standard to compare the brand horizontally :) Look at the style is just the surface, all the cabinets panel color, countertop color, cabinet with you are fried me to me to fry you. Your family can do my home and can do the next comparison Price: This price is not just the countertop + cabinet + panel. It's the sum of all the materials you need. The lowest prices are included in the alternative.
Then compare the warranty.
Not only is the material determining the price, the time limit for the warranty is also related to the price, and the duration of the warranty for the strong material is long. From the side to understand the merchant's recognition of their own cabinet.
Through the layers of screening should be able to choose to be satisfied with the cabinet Note: Cabinet merchants used the trick
1: open to sell, the appearance of the price is tempting, in fact, as expensive as accessories.
Top seals, light panels, open cabinet boards, upper and lower eyebrow lines, hood seals, hardware fittings, and even handles are charged.
2: Special attention is given to the name of the tabletop by its own name. (It's best to ask the source of the table)
3: Province material under the article. 16 cm plate, side plate only 1 fast, hardware accessories are unknown, back splint with 3 cm, below the cabinet surface to save the overall board ... ...
4: Warranty commitments (1 year warranty is best not to choose, at least to the overall 3 year warranty and 5-10 year warranty on the desktop. Only 1 year shows that the merchant does not have confidence in their products)
There are thousands of ceramic tile tile brands in the Procurement section, and each one is not exhausted. The reason is that ceramic tile manufacturers use sales channels of distributors to increase sales, and the same bricks are packaged into many different brands. There is also a division between the 1st line brand and the 2nd line brand. Of course, the price of the first-line brand is high, and the low price of the two-line brand is affected by the fame.
Such as: Dongpeng, Jin Yitao belong to more than one factory, Mona Lisa and Jidong belong to more than one factory, such as: Guanzhu, Samet, Grice, Hui Wanjia belong to the new Pearl Group can be said under the chess It is the same thing.
Tiles no matter how strange their names are, you'd better ask the kind of bricks, such as seepage, snow white, micro powder, micro crystals..... horizontally compare 1, 2 line brands and the same quality price.
Personal understanding of Dongpeng ceramic tile is the best known tile in the flatness and pinhole degree. Its first-class product standards have achieved the performance of some brands of excellent ceramic tiles.
Tiles are now basically no fake, only grade points. Because a tile production line must be several million yuan, fraud is not as good as self-reliance brand.
The smartest way to do this is to take the online quotation to your nearest new building market survey.
The recommended procurement strategy is:
1: Pick suits (everybody likes different)
2: looking for general agent or manufacturer (2 and 3 agents are to help the general distribution, to find the total generation of course lower)
remind:
General 1 and other products used in a large number of projects. Non-60*60 and 80*80 ceramic tile 1 and other products are more.
Excellent products for home decoration.
Such as: Mona Lisa warehouse in Bantian, Younuo, Fenglian in Qingshuihe.
Writing grades clearly at the next time can be avoided, goods are not on the board.
1: Buy tiles on the invoice receipt to write excellent products, fake a penalty of ten
2: Hypermarkets belong to Level 2 distribution, and replenishment is the general agent. Problems need to be coordinated through the store, time-consuming and laborious. It's better to buy directly from general agents and manufacturers.
3: Try to check the delivery as much as possible.
The Procurement Sanitaryware Sanitaryware and Tiles are also divided into 1 and 2 line brands.
For example, Faenza, Wrigley, and Anwar are all produced by one factory. The internal structure is similar to most of the Swiss Geberit water components. The appearance is slightly different. (Fen En 45 percent off, Wrigley 70 percent off). For example: B&Q's 2 bathroom cabinet brands, vov/Eyers, belong to the Cassio sub-brand.
The group purchase price is about 20% off B&Q.
Toilet:
1. Look at the whole. The well-known storefronts all have their own characteristics. There are model rooms where various qualification certificates that can prove their strength are placed in more obvious positions. Whether the sample is arranged neatly and beautifully, it can reflect the importance and intention of the manufacturer to his brand.
2. Touch the surface. The glazed surface and the green body of the high-grade toilet bowl surface are more delicate, and the hand-feeling surface does not have the uneven feeling. The glazed surface of the middle and low-grade toilets is relatively dark. Under light irradiation, they will have pores, and the glazed and green bodies are rough.
3. The weight component. High-grade toilets must use high-temperature ceramics in sanitary ceramics. The firing temperature of such ceramics is above 1200°C. The material structure is completely transformed into crystalline phases, resulting in an extremely dense glassy structure, which achieves a full ceramic of sanitary ware. Requirements, handcuffs have a heavy feeling. The medium and low-grade toilets use medium- and low-temperature ceramics in sanitary ceramics. Because these two ceramics have low firing temperatures and short firing times, they cannot complete the crystal phase transformation, so they cannot reach all-ceramics. The request.
4. Specific water absorption. The most obvious difference between high-temperature ceramics and medium- and low-temperature ceramics is the water absorption rate. The water absorption rate of high-temperature ceramics is less than 0.2%. The products are easy to clean without adsorption of odor, and no glaze cracking or partial water leakage occurs. The water absorption of medium and low temperature ceramics is much higher than this standard and it is easy to enter the sewage. It is also difficult to clean and emit unpleasant odors. Cracking and water leakage will occur for a long time.
5. Try flushing. For toilets, the most important function is flushing, and whether the toilet piping design is scientific and reasonable is the biggest factor affecting flushing. Therefore, a general store or distributor of a regular manufacturer has a water test stand for customers to use for water testing. In the standard specified in GB-T6952-1999, it requires that in the case of water less than or equal to 6 liters, 3 On average, there should be at least 5 table tennis balls filled with water on average.
1: Water (generally the best Geberit Swiss) The general price of toilets is above 800, the second is the price of engineering plastics generally between 300-800. Chaozhou toilets are mostly priced around 300-600.
2: The price of a fully-magnetic toilet at 1,200 degrees is generally more than 1,000, and the price of incomplete magnetization is much lower.
3: Conjoined bodies are generally more expensive than the body, mainly because the cost of forming a conjoined body is higher.
4: Affected by the brand.
5: The only one imported is "expensive"
The toilet is best to buy a good, first of all, the provincial water has the size of water, followed by the use of long-term low water absorption will not crack, black, water and durable.
Bathroom Cabinet:
1: style
2: The basin is full of magnetic pots, or plastic.
3: Waterborne paint and baking paint process effects. (See the production company's flow equipment situation)
4: Hardware (copper is the most expensive, followed by stainless steel, zinc alloy, plastic)
The procurement section of the coating mainly talks about the current 15-18 blocks of latex paint, and it should pay attention to the package materials. It is estimated that in addition to cutting corners on topcoats, the primer used is basically the lowest grade of Mei Shili.
It is understood that more than 10 home network purchase price of water does not mix with latex paint, finished primer package material at around 20 yuan / flat transaction price, cost-effective.
All brands of paint have high, medium and low points. Smooth surface with water, no mixed surface.
Doers (Raw Noodles), Dulux (Glossy), Lai Wei Paints, Master Paints (Glossy Faces), Ostriches (Light/Rough Noodles), and Sun Jieshi, which are often advertised in the housing network, are all of good quality. The choice of construction team is critical.
Turn a paint identification method:
1. Surface effect High-quality latex paint has a large area of ​​uniform color and uniform coating. Take a small amount of paint into the water in the cup of water immediately become cloudy quality is certainly poor.
2. Scrub Resistance High-quality latex paint wall can be wiped without wet powder, which is an important indicator to measure the life of latex paint. At present, the construction method of latex paint is very backward, generally using brush and roller construction. This results in:
A brush marks, hair removal, uneven.
B glossy latex wall surface becomes dull.
The C wall is heavily floured.
The main reasons for the above are:
a Over Dilution Due to the high viscosity of the latex paint, hand brushing behind it is more difficult to brush and the brush mark is obvious, so it has to be diluted with water. General latex paints can be diluted by 10%-30%, and they can be diluted up to 60%-100%.
b. In order to prevent undue dilution due to over-dilution, 107 glue is sometimes added to latex paint.
As a result of the above non-standard operations, the quality of the wall surface has been reduced, and adhesion, scrub resistance, and texture have been greatly damaged. Serious and even matte paint turns into white paint, low light becomes no light, and paint becomes flowery.
The weather returned to the wall and became moldy and fell off. Often seen in the decoration complaint appeared. The main problem is the paint base, followed by the finish.
Wall paint base: decoration company like to use 108 plastic + fly powder bottoming, low cost per square meter 2 yuan. Disadvantages are the high content of 107 formaldehyde and formaldehyde release period from 7 to 15 years. 108 plastic + flying powder with many impurities, low saturation and soluble in water. When the weather starts to dilute, the primer will dip, mold, and peel off.
I know that there are finished emulsion primers on the market that can be effectively waterproof and can even be used in kitchens and bathrooms. Primarily, the emulsion primer molecules are insoluble in water. Emulsion primer prices and 108 plastic + flying powder almost.
1: buy Dulux paint or adjust the color to see the color you need to brush. Personally think that dark colors need to be bought, and light-colored ones.
2: Buy Dulux paint (easy to waste). Buy color concentrate (red, yellow, blue, 3 primary colors) by yourself to determine the amount by the size of the wall (master of the brush can control).
3: Dulux color scale and the color you actually brush up will be a bit color cast. It will be affected by the number of ambient colors and brushes.
4: Do not adjust the color of your own tone to a very deep tone (the color seen in the barrel and the color of the actual brush have a greater brightness, saturation difference), so say slowly to the wall to test you need effect.
5: Use color toning. Red yellow blue 3 primary colors, it is best to choose 2 kinds of color tone. The three colors are all grayed out. The effect of single color tune out I have seen very harsh and uncomfortable, saturation is too high.
6: It is best to bring a color bid book to compare with your own color.
7: The dark color can cover the light color, and the light color can hardly cover the dark color.
8: Try to select the daytime palette. Even the evening masters can't be sure.
9: Do not use up all colors, leaving some for repair.
note:
1: Be vigilant to put other paint inside the used cans.
2: Grasp the amount of use, be wary of the decoration company to the rest of their own paint to their contractors do.
3: See the factory date and expiration date, anti-counterfeiting stickers, and security check phone
3: Leave paint spare
4: How to distinguish between imitations and genuine products made in the small and medium workshops of furniture furniture purchased in the procurement of bills:
1: Look outside the carton packaging. Regular manufacturer's packing box has enterprise logo, brand logo, production batch number, date, certificate of conformity, bar code and so on.
2: Carton internal packaging. Protection measures are in place and not loose. There will be a protective film between each board.
3: Look at the plate. Conditioning 1 to, the edge is intact, and the opening size is one to one. The bottom of the entire cabinet plate will generally have a brand logo badge.
4: Look at the hardware. Usually there is a small plastic bag installed, after installing a screw is not much nor a lot, are using a turn screw can not see a screw and nails. Some even have handles with a brand logo.
Reminder, it is best not to buy a special wardrobe.
Most of the closet wardrobes are sacrificing the internal structure of the wardrobe to reduce costs and thus lower prices. To buy a closet to open only a few laminates, might as well buy a wardrobe of drawers, hangers, mirrors, trousers racks for conventional products;
There is no problem with a special bed. Because the bed always needs those plates to shape.
Purchasing article cloth sofa
1. To see if the sofa skeleton is firm, this is related to the life and quality assurance of the sofa. The specific method is to lift one of the three-seater sofas. When the raised part is separated by 10cm, the other leg is off the ground, and only the other side is also off the ground. The inspection is passed.
2. Look at the quality of the sofa's fill material. The specific method is to press the armrests and backs of the sofa by hand. If the presence of wooden frames can be clearly felt, then the packing density of this set of sofas is not high enough and the elasticity is not good enough. The wooden frame that can be easily pressed on will also accelerate the wear of the sofa cover and reduce the service life of the sofa.
3. Check the resilience of the sofa. The specific method is to allow the body to sit on the sofa in a free-fall manner. The body is bounced at least twice by the sofa cushion to ensure that the sofa is flexible and has a longer service life.
4. Pay attention to sofa details processing. Open the zipper of matching pillows, observe and touch the lining cloth and filler inside; lift the sofa to see whether the bottom treatment is detailed, whether the sofa legs are straight, whether the surface treatment is smooth, whether there are anti-slip mats at the bottom of the legs, and so on. A good sofa also maintains its fine quality in the details.
5. Feel the surface of the sofa with your hands, is there any phenomenon that stimulates the skin? Observe whether the fabric color of the entire sofa is uniform, whether the joints are firm and smooth, and whether the work is fine.
The sofa is destined to be one of the most frequently used objects in the home. Whether reading books, watching TV, or even promoting emotional slapsticks, it will be staged on the sofa. After a long time, this sofa is not dirty. Some sofas are removable and washable. Is your sofa just as convenient? However, the more upmarket brands are, the fewer those that can be washed and disassembled, because the finest fabrics can not afford to be washed and washed several times. This will affect the flat appearance of the original fabrics, so high-end brands will remind you Send sand regularly to specialized cleaning companies for dry cleaning.
At present, the main types of substrate furniture are:
1. Particle board. The particle board has the advantages of light weight, strong nail holding force, good moisture-proof and waterproof property, easier control of formaldehyde emission, less deformation, etc., and is suitable for the place where the furniture is flat. The disadvantage of particleboard is that it is not easy to bend.
2. Medium density board. The characteristics of the wood is fine, easy to process, especially suitable for curved surface and shaped design.
Compared to high-quality MDF, high-quality particleboard has the disadvantage of large particles. Medium density boards should be used for painting, engraving, and blister processing.
Substrate surface material:
1. Paint paper. The performance of all aspects of the sticker furniture materials is not ideal, and it can not achieve real industrial production. It cannot be repaired if it is broken.
2. Melamine. Has a certain degree of wear resistance, heat resistance, acid and alkali resistance. There are no problems with door panels, cabinet panels, and partitions. Due to fear of scratching sharp objects, care should be taken when processing and using it.
3. Fire board. The fire board has better high temperature resistance, abrasion resistance and chemical resistance, and some fire boards can be bent after being heated. Suitable for countertops and office furniture, not for home furniture. Can not be used alone, it is generally to paste it on the artificial board or wood surface. Due to the shrinkage of the fireproof board, the craftsmanship is not paid attention to when sticking and it is easy to open the glue.
4. Natural veneer veneer. Cut from high-quality wood and stick to the appearance of wood-based panels, due to its natural properties and the unique texture of nature, it is considered second only to solid wood furniture panels, especially in the trend of protecting the environment to replace solid wood, is now high-end furniture The main decorative material used.
Purchasing articles - the procurement of electrical appliances can be concentrated in the store to see samples, select, really very convenient. However, most of the electrical appliances are channels for market sales. There are few brands that have their own flagship stores and traditional market stores. The most seen point is the maintenance point.
The method I purchased is:
1: Buy store holiday special products. Avoid buying during the peak period (usually the difference between the special price product and the traditional market is not significant)
2: Through the store to understand the product, its instructions and warranty card to pay attention to his phone, you can call to understand the general agent or factory direct sales point address. Online search to find contact information is also a good idea (general agent or factory direct sales point directly to get goods cheaper than the store price, not to mention conventional products)
3: Network community group purchase. A 5-10 home purchase at the same time is the cheapest way to save money. The point is to contact the real agent instead of the distributor. Of course, the greater the number, the stronger the purchasing power and the lower the price.
The electronics delivery and maintenance purchased by the stores are the general agent or the factory direct sales points. General agent or factory direct sales point into the store, admission fees, advertising fees, rent, detaining time these have become a stumbling block to a bargain.
Decoration in the general sequence number work content
1 Walls, demolition, eradication
2 Rebuild
3 Basic leveling
4 foundation brushing
5 penthouses, playing steel racks
6 On-site production of steel staircases, handrails, etc.
7 Cabinets are set
8 Water heaters are set
9 Under air conditioning
10 All hydropower heating and ventilation equipment will be set
11 Sanitary ware, etc.
12 Hydropower location
13 Hydropower Reconstruction
14 slot, hole
15 Termite treatment
16 piping, bottom box laying, welding,
17 threading, wiring
18 window and security net
19 Installation window and security net
20 Waterproof
21 days, exterior window openings, balcony, waterproof
22 kitchen, bathroom and other waterproof
23 Woodworking Materials Approach
24 In addition to formaldehyde
25 brush anti-pollution and anti-pollution varnish
26 Woodworking approach
27 Termite-proof, dampproof chassis
28 fire protection
29 frame, laying floor
30 Laying Panels, Edge Lines
31 Doors, Panels, Security
32 Tiles, Tables, Door Stones
33 wooden flooring
34 Other long-time furniture, jewelry, etc.
35 Other Fixtures, Cabinets, Doors, Walls, Boards, Installations
36 Oil Workers Entering the Field
37 Anti-rust oil
38 Filling the eye
39 Batches
40 repeatedly oiled
41 Nitro paint to 6-8 times
42 Latex paint 2-3 times
43 Paving tiles
44 Kitchen Bathroom Ceiling
45 kitchen bathroom equipment installation
46 Wood Flooring Installation
47 lamps and other installations to build a whole wardrobe is good? Or is it all for the decoration company?
My suggestion is to make a whole wardrobe better when the current construction team is not good or bad. The reason is as follows:
1: The decoration company can only use a large core board as a wardrobe, only a simple opening equipment, almost all manual completion. Daxinban wardrobe cabinets may become larger; poor master craftsman brush paint is not uniform, first do the cabinet and then brush the paint may lead to brushing in some places; drawers and drawer side panels do not brush some decoration team Paint; install the wardrobe before laying the floor, change new trouble; artificial edge easily fall off. The advantage is the maximum use of space.
2: customized whole wardrobe: material has a large core board, high density board, moisture-proof board. Personally think that relatively better moisture-proof plate substrate. Custom-made wardrobes are mostly completed with the aid of equipment, complete machine cutting, automatic edge sealing, and automatic hole-reserving higher reliability.
Procurement articles on the ceiling material, PVC can not be considered, although cheap, but deformation, discoloration problems, unless you change in 2 years, or do not use PVC. Shenzhen market (the same below) has a high-end PVC ceiling in Taiwan, which is relatively fashionable and has a slightly better bending resistance, but the price is unacceptable. The surface pattern is printed and easy to scratch. The entire panel is also easily knocked out of the hole.
There are also many steel plates, which are heavy, and actually there are bad businessmen posing as thick aluminum plates! The problem with the steel plate is that no matter what steel it is called, it will rust, especially the cutting part. After the paint surface is damaged, it will gradually rust and cannot be solved. Therefore, use steel plate ceilings with caution.
Of course, the aluminum alloy board is the best. In fact, both the board and the square board are good. Here are some specific aspects to talk about:
First, the thickness: The standard argument is three thicknesses of 0.4, 0.6, and 0.8, but in fact they are all added with the thickness of the paint film. It will actually be a little less, it is 0.5, 0.7, etc., so we see some brand mark 0.5 do not think it's A little difference in thickness, that's true! Of course, the greater the thickness, the better, but 0.6 is enough. In fact, mainly to see the strength, the strength of the same thickness may be very far (maybe different types of alloys, perhaps the nominal thickness is deceptive, anyway, you are not likely to measure the thickness), you shake with a square board, feel Its strength difference, feel good on the line. This can only be felt by oneself, and it is easy to compare!
Second, surface treatment: Surface treatment are roughly the following: electrostatic powder coating, printing, roller coating, paint, spray coating and so on. Among the principles I don't understand, let me talk about the price and the quality. Cheap is the first one, according to the brand is good or bad 40-60 range, but without exception, easy to change color, especially white yellow, so buy you just buy beige! The printing is like screen printing. This is what the blue sky and white clouds are. It's also cheap. It's similar to the first one. I don't like it anyway, so I didn't figure out why it's cheap. The latter three should be good in solving the problem of discoloration. There are not many manufacturers of roller-coating panels. They have thin lacquer layers, but the quality should be good. The price is about 80-100. The key is what the paint is. The paint is usually made of South Korean or Japanese paint. It's all good. It looks like Japan is better. Its price may be slightly more expensive than rolling. The most expensive one is the film, which is mainly bright and shiny on the surface.
Because there is a layer of film, you can maintain brightness for a long time. It's really beautiful and really expensive!
Purchasing articles of laminate flooring The structure of laminate flooring is generally divided into four layers: the surface layer is a wear layer, is a surface layer paper containing wear-resisting materials such as aluminum oxide, and the second layer is a decorative layer, printed by computer simulation production. Paper; The third layer is wood-based board substrate, which mostly uses high-density fiberboard (HDF), medium-density fiberboard (MDF) or special type of high-quality particleboard; the fourth layer is the bottom layer, which is a moisture-proof balance layer, and generally adopts certain strength. The thick paper is immersed in melamine or phenolic resin, which can block the moisture and moisture from the ground, thus protecting the floor from the wetness of the ground, further strengthening the moisture-proof and balance functions of the bottom layer.
First, the main performance advantages of laminate flooring are:
1, compared with the traditional solid wood flooring, size specifications.
2, more varieties, can simulate a variety of natural or artificial patterns.
3, the overall effect of laying the ground is good.
4, uniform color, visual effects are good.
5, compared with solid wood flooring, the surface of high wear resistance, with a higher flame-retardant performance, strong resistance to pollution corrosion, compression, impact resistance and good.
6, easy to clean and care.
7. The dimensional stability is good, so it can be ensured that the gap between the floors during use is small and it is not easy to arch.
8, easy to lay.
9, the price is cheaper.
Second, the main disadvantages of laminate flooring are:
1, compared with solid wood flooring, this type of floor due to the greater density, so the feeling is slightly worse.
2. The product has poor repairability and must be replaced once it is damaged.
3, due to the use of formaldehyde adhesives in the production process, so this type of floor there is a certain problem of formaldehyde release, if the formaldehyde emission exceeds a certain standard, will have a certain impact on human health, and cause environmental pollution.
Third, pay attention to the points when purchasing laminate flooring:
1. Do not purchase “three-nothing†products. Products that are “full foreign-text-packed†should be purchased with caution. Regular products should have Chinese identification and related instructions in accordance with domestic laws and regulations.
2, can not just map cheaper, but buy a very low price product. The combined cost of raw materials, production costs, sales costs and normal business profits of qualified products should be around 60 yuan/m2. Unless engaging in promotional activities, the normal price should not be lower than this price. Some inexpensive products are likely to use unqualified raw materials.
3, should buy some of the more well-known companies products. Most of these companies have large-scale production, advanced production equipment, certain testing methods, guaranteed product quality, and good after-sales service. Problems with product quality are also relatively easy to solve.
4, can not just look at the business information, to understand the actual situation of the product. Many businesses’ promotional materials indicate that their wear revolutions are “15,000 rpmâ€, “18,000 rpmâ€, and so on. Normally sold products are generally not able to reach this number of revolutions except for very few.
Fourth, the correct maintenance method:
1, can not use a lot of water erosion.
2. Vacuum cleaners or semi-dry rags should be used for daily cleaning.
3, it is advisable to carry furniture to lift, do not drag.
4. Putting a mattress on the door is a good way to maintain the floor.
5, avoid heavy objects or sharp objects hit, scratch the floor to prevent damage.
6, within 48 hours after laying the floor, try to avoid walking and placing heavy objects.
The main flooring manufacturers in the room network to send information "Hongji" floor "Tian Fuli" laminate flooring "Lao Chen" floor "Holy Elephant" floor "Hong Nai" floor I spread the principle of flooring If the whole house is paved to buy expensive Point, especially living room due to high usage rate:)
Only the bedroom shop to buy specials (I even see Tim Philip has more than 50 / square meters of products) bedroom furniture after placing only the aisle area to use, buy a high price feel a bit wasteful.
Cabinet attention to understand the following issues:
1: whether automatic mechanical PVC edge sealing;
2: Whether there are laminates and wood strips below the table (the interface between the artificial stone countertop and the cabinet body is treated with wood linings to increase the strength of the table);
3: see light board, open cabinet board; up and down the eyebrow line; top seal plate; hood cover plate; baseboard; pull blue; glass door; hanging code; gas vent network. Extra charge or gift
4: Minor problems such as tamper proof, water tank aluminum floor, punching and emptying rubber stopper, and water installation.
5: cabinet material thickness, table brand, hardware brand.
Three trees paint ten brands of paint furniture door prices latex paint bedroom furniture living room wall color kitchen as a whole what is the model room decoration looking for decoration company okay bathroom decoration model room bathroom model room model room design attic decoration model room decoration model room familyè£…ä¿®æ ·æ¿æˆ¿è£…修客厅房åè£…ä¿®æ ·æ¿æˆ¿æ•´ä½“åŽ¨æˆ¿ä»·æ ¼ç“·ç –æ ·æ¿é—´å®¢åŽ…è£…ä¿®æ ·æ¿é—´å®¶è£…æ ·æ¿é—´å¸ƒè‰ºæ²™å‘å垫家åºæ©±æŸœä¸é”ˆé’¢çŽ»ç’ƒé—¨é’¢æž¶æ¥¼æ¢¯ä¸é”ˆé’¢æ•´ä½“橱柜白色家具æ¿å¼å®¶å…·å¸ƒè‰ºæ²™å‘地æ¿ç –厨房玻璃推拉门功能沙å‘床布沙å‘柜å柜å门玻璃门功能沙å‘çŽ»ç’ƒç –æ©±æŸœé—¨çŽ»ç’ƒæŸœå工艺玻璃布艺床钢架
Sport camera
Foream X1 Original Wifi Action Camera Waterproof 1080P Action Cam Sport Camera Helmet Deportiva Video Camcorder Broadcasting
New Product Co., Ltd. , http://www.nbgameaccessories.com