Rock hollow brick
It is a shale hollow brick with shale as the main body, gangue as the main body, cement as the viscous material and mechanically pressurized.
Sintered hollow brick
Sintered hollow bricks are referred to as porous bricks.
Sintered hollow brick refers to a brick with vertical pores (pore rate not less than 25%, small pore size and large number) by shale, coal gangue or fly ash as main raw materials. Its outer dimensions are 290,240,190mm, the width is 240,190,180,175,140,115mm, and the height is 90mm. The right-sided, large-face and strip faces of two opposite sides form a right-angled hexahedron, and at least two evenly arranged strip holes are opened in the middle. Separated by ribs, the strip holes are parallel to the large surface and the strip surface, and the outer wall is in between, and the two openings of the strip holes are respectively located on the two top surfaces, and a plurality of apertures are respectively opened between the strip holes and the strip surfaces. The side row holes are ribs between the side row holes and their adjacent side row holes or adjacent strip holes.
Clay hollow brick
a hollow hollow brick, wherein a rectangular through hole extending through the entire thickness of the brick body is disposed between the upper and lower end faces of the rectangular brick body, and the elongated through hole is disposed along the length direction of the rectangular brick body, and is located at the In the middle of the width direction of the rectangular brick body, a pair of oblique through holes are respectively disposed between the two ends of the elongated through hole and the four corners of the rectangular brick body, and the oblique through holes penetrate the entire thickness of the brick body. A card slot and a glaze layer are disposed at edges of the front, rear, left and right end faces of the rectangular brick body. The utility model has novel and reasonable design, high overall strength, large force area, convenient production, and good social and economic benefits.
Non-burning hollow brick
A hollow brick directly pressed by a machine, the specifications are similar to ordinary hollow bricks.
Glass hollow brick
1. Introduction hollow glass brick, English name glass block. It is a non-load-bearing decorative material that has only become popular in China in recent years.
It is literally understood that the hollow glass brick is first hollow, followed by the glass product. The hollow glass brick is made by welding two half blanks at high temperature. Because the middle is a closed cavity and there is a certain micro-negative pressure, it has light transmission and opacity. , sound insulation, low thermal conductivity, high strength, corrosion resistance, insulation, moisture and so on.
Glass hollow brick monomer 2. Composition and characteristics The chemical composition of hollow glass brick is high-grade glass sand, soda ash, quartz powder and other silicate inorganic minerals. The raw materials are melted at high temperature and refined, non-toxic, harmless, non-polluting and odorless. It does not pose any harm to the human body and is a green product.
Magnetic Rubber Sheet,Roll Magnet,Sheet Magnetic Roll,Adhesive Magnetic Tape
Honesun Industrial Co.,Limited , http://www.chinamagnetise.com