Types of Radiators Radiators currently on the market mainly include iron radiators, aluminum radiators, steel radiators, and copper-aluminum composite radiators. The first choice depends on whether your home heating system is a central heating or an independent heating system.
If the central heating, the choice is more, steel and copper aluminum radiator can be; independent heating home is best to choose copper and aluminum composite radiator.
Steel Radiator: beautiful appearance, but fear of oxidation, to take anti-corrosion treatment, water must be sealed when filling, prevent air from entering. And it has certain requirements for the district's heating system, requiring professionals to visit.
Aluminum Radiator: Not restricted by the district heating system, it has good heat dissipation and energy saving. If it is found that the indoor temperature is not enough, radiators can be installed after the heating season. However, the aluminum material is resistant to alkaline water corrosion, and the internal anti-corrosion treatment can increase the service life.
Copper-aluminum composite radiator: high pressure bearing capacity, good heat dissipation effect, good anti-corrosion effect, no need of full water maintenance after the heating season, no alkalizing and no oxidation, more suitable for northern water quality and complex heating system, but the shape is simpler .
Advanced knowledge: After choosing the radiator to make the choice of the material of the radiator, pay attention to how much to buy and how much longer to buy.
How much to buy the radiator must be calculated according to certain steps.
1. Area: Calculate the area of ​​the bedroom, living room, bathroom, etc., as the basic data for the calculation.
2. Calculate the wattage (W): "W" (watts) is the heating of the heating, how much "W" can warm the room has a calculation basis, we can calculate the reference data according to the following civil heating heating index to calculate Purchase the amount of heating. Housing 45-70, offices, schools 40-80, hospitals, kindergartens 65-80, single-storey houses 80-105, canteens, restaurants 115-140 (units: W/m2).
According to the use of the house, consumers can use the above data to multiply the above data to obtain the heat supply needed by the room. However, these are only theoretical values ​​and may change in real life. Under normal circumstances, buildings, northern rooms, urban areas, and the middle are warmer than bungalows, south rooms, and cities, and the two ends of the house may not consider the amount of wealth when calculating the amount of heating. Conversely, 10% to 20% can be properly added as ample amount of heat to avoid insufficient heat in cold weather.
3. Calculating the number of sheets: When the total number of watts required is calculated, the consumer can calculate the number of sheets that need to buy heating, and can then calculate the number of sets that need to buy heating. However, heating is not all possible to separate and combine. Consumers can choose the appropriate heating power for their area.
Height and length:
The radiator should be placed under the window.
The length of the radiator is preferably similar to the width of the window, and the choice of radiator height depends on the height of the window sill. The lower part of the radiator should leave a gap of 100 mm to ensure that the air can smoothly pass through the radiator to form a circulation of air.
Installation and after-sale service:
Heating installation focuses on installation, the principle is: professional, skilled and secure. To the sales, installation, after-sales service integration of the store to buy more worry and confidence.
Awning & Outswing Casement Windows
Outswing Casement Windows,Awning Casement Windows,Awning Window with Frosted Glass,Small Awning Windows
Sliding Patio Doors Co., Ltd. , http://www.only-doors.com