Recently, newspapers and magazines have reported that serious accidents have occurred due to a burst basin. In fact, basins, toilets, etc. are ceramic products and there is no chance of explosion. The accidental injury to the washbasin is caused by the falling of the washbasin and the resulting fragmentation of the user. According to in-depth exploration of the main cause of the accident, it was discovered that if it was not because it was not securely installed, it was improperly used. The basin was used as a handrail to support or place heavy items, even sitting on the basin, causing the basin to fail to load and fall. Therefore, to prevent the accidental drop of the basin and the damage caused by the debris, it must be used in accordance with the normal use of the basin. 1. In the humid environment of the bathroom space, accidents are mostly caused by children. When children bathe and wash, they like to play in the water. Because of environmental concerns, if there are improper actions, such as: one foot stands on the edge of the bathtub and the other foot In the washbasin or with both hands on the left and right sides of the washbasin; dangerous acts of jumping up and down can cause accidents if they accidentally slip. If the washbasin is broken by a force that cannot be resisted by an instant from outside, it will produce many sharp fragments and be injured by the debris. In general, children should be taught how to use the bathroom properly, and pay more attention to the child's activities in the bathroom. If any inappropriate behavior is found, correct it immediately to avoid accidents. 2. Change the bad habits of placing objects on the basin. 3. Above the basin, put on a large or heavier daily necessities on the cosmetic board, please install additional storage cabinets to facilitate the collection of daily necessities and avoid placing them on the makeup board. 4. Peacetime cleaning: porcelain soft bristles or sponges should be cleaned with a neutral detergent, but do not rinse with hot water or directly into hot water to avoid cracking the basin. To use the basin to hold water, put cold water first to remove hot water to avoid burns. 5. Regular maintenance: The bottom of the reservoir head can be removed and the accumulated stains can be removed to keep the drainage unobstructed. 6. Regularly check whether there is any dark cracks in the washbasin in your home. Fill the basin with water and pour in colored pigments for one night. If there is a dark crack phenomenon, you can see clearly. 7. When cleaning the basin, use sponges and detergents as far as possible. Remember not to use crumb cloth, or scrub with hard brushes, alkaline chemicals or solvents, as small scratches will form on the surface of the basin, making it become Rough operation and easy deposition of dirt. 8. Porcelain and glass have extremely low thermal conductivity. If they are hot and hot, they will break. Therefore, the temperature difference should not be too large, and excessive external force must be used to avoid cracking. 9. If it is a submerged wash basin, when cleaning, pay special attention to the dead part at the junction with the basin below the countertop.
Zhongyu bathroom bathtub space toilet bathroom glass locker
PF MOLD Co.,Ltd. focuses on high-speed precision progressive stamping dies manufacturing, design, product widely
used in automotive electronics, medical electronics, computers, mobile phones, home appliances, wearable devices and other consumer
electronics industries. For 20 years, we have been focused on the development and manufacture of high precision miniature metal
parts; and we rely on high precision, high efficiency, high-life tooling help guests from around the world to enhance their market
competitiveness.
Our precision metal stamping services include:
Custom metal stamping
Precision metal stamping
Progressive die stamping
Terminals metal stamping
Connector shell metal stamping
Metal contact stamping
Deep drawing
Reel to reel metal stamping
Metal forming stamping
High speed metal stamping
Stainless steel metal stamping
Insert Molding metal stamping
Our precision metal stamping materials include:
Copper
Beryllium Copper
Brass
Bronze
Carbon Steel
Foil
Silver
Nickel
Tin
Gold
Stainless Steel
Spring Steel
Sheet Metal
Silver
Nickel Alloy
Nickel Steel
Phosphorus Bronze
Metal
Stamping Mold
Tooling For Auto Parts,High-Gloss Part Molding,Metal Stamping Mould,Stamping Mold For Water
PF Mold Co., Ltd. , http://www.pf-mold.com