Wood, flooring, ceramics, and paint are the biggest expenses in the decoration process and consumers are most concerned about. Families with a general economic status are also willing to invest in these projects. However, no matter how good the design is, how expensive material is not properly handled in details, it will greatly affect the final results. Below, we briefly explain some of the details that are easily overlooked by consumers during the renovation process.
Baseboard quality
In addition to its own function of protecting the walls, the baseboard has a considerable proportion in the proportion of beautiful homes. Is the outline of the home ground, the line of sight will often fall on it naturally. Beautifully shaped, exquisite baseboards can often play a key role in adding color to your home. However, the baseboard is also often the place despised by people. Have seen some renovated houses, design, construction can not see what is not good, but that the overall effect is not very good, uncomfortable at the moment, and finally found that all because of the rough and inexpensive baseboard seriously affected the effect.
Wall cabinet installation process
The advantages of the embedded wardrobe or other cabinets embedded in the wall are numerous, which not only increases the internal space of the cabinet (can stand uprightly), but also makes the cabinet body simple and generous. It should be noted that the wall on which the cabinet is placed and the side of the cabinet must be horizontal and vertical. Otherwise, when the cabinet is installed, it will be difficult to deal with gaps, barely fill gaps, and the vision will be distorted. It will appear rough and the craftsmanship will not be fine, and the effect will be greatly reduced. An expensive set of closets will be covered by these small details. Destroyed.
Also, if it is a sliding door, the ground is uneven and it will cause the sliding door not to close tightly. Therefore, the installation of wall cabinets, floors and walls must be strictly guaranteed horizontal and vertical.
Light source design
In the living room, the concept of a primary light source and an auxiliary light source is required before the lighting is installed. The main light source refers to the lighting of a specific local space, such as table lamps for reading, floor lamps, chandeliers on the dining table, and spotlights for wall decoration lighting. The auxiliary light source is the headlight in almost every central location. Many people do not have this concept when they are decorating and decorating their homes.
Glass adhesive mildew
Glass glue is the most inconspicuous thing in the decoration process, mainly used in the repair of cabinets, sanitary ware and other crevices. If you use a poor quality glass glue, it will appear black and yellow after a while. It is advisable to buy anti-mildew products during the renovation of glass glue.
Sealant strength
In the decoration, we generally use white cement powder to fill the joints, but its bonding strength and water resistance are poor. After dehydration or thermal expansion and contraction, cracks will appear, resulting in the water leakage of the tiles. In addition, the white cement paste fastness And the hardness is not as good as the sealant, and the discoloration resistance is not as good as the sealant. It is advisable that consumers choose the sealant when decorating.
Floor drain rule
The floor drain is lower than the ground, which is often easily overlooked and is not easily remodeled. Therefore, be sure to remind the decoration workers that floor drain must be lower than the ground in order to avoid the phenomenon of “swimming with water†after each bath.
Entrance decoration children's room decoration decoration design glass space paint home decoration decoration style glass brick cabinet door cabinet cupboard door glass cabinet technology glass home cabinet wall cabinet glass door glass sliding door closet door floor tile glass table glass dining table lamp fashion small family home decoration decoration Home
Epoxy Anti - Static Level Coating
Scope of adaptation:
Walls, floors and storage tanks for all kinds of antistatic factories such as electronics, microelectronics, telecommunications, computers, precision instruments, textiles, printing, powders, chemicals, organic solvents.Generally 5 years or more
Construction technology:
Technical index:
project |
index |
|
Drying time |
Table dry |
≤4 |
Hard work |
≤24 |
|
Adhesion (grade) |
≤I |
|
Pencil hardness |
≥2H |
|
Impact resistance |
40 Pass |
|
Flexibility |
3mm Pass |
|
Wear resistance(750g/500r,weightlessness,g) |
≤0.03 |
|
Water resistance |
48 hours no change |
|
Resistant to 10% sulfuric acid |
56 days no change |
|
Resistance to 10% sodium hydroxide |
56 days no change |
|
Gas-resistant, 120% " |
56 days no change |
|
Surface resistance |
105-108 |
|
Volume resistance |
105-108 |
Epoxy Anti - Static Level Coating
Epoxy Anti - Static Level Coating,Anti-Static Epoxy Topcoat,Epoxy Topcoat Material,Epoxy Finish Antistatic Material,Epoxy Antistatic Self-Leveling Floor
Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com