Nowadays, some consumers like to break up the colorful flower wall tiles and lay them on the floor of the bathroom, and then put the elegant floor tiles on the wall to make them look different. However, experts say that it is neither scientific nor safe, and wall tiles and floor tiles cannot be mixed.
The indoor tiles are divided into wall tiles and floor tiles according to the location of the paving. Wall tiles are ceramic products. Floor tiles are usually porcelain products. Their physical properties are different. The two are very different from the selection of clay ingredients to the firing process. The water absorption rate of wall tiles is about 10%, and the ground water absorption rate is only About 1%. Floors in the bathroom and kitchen should be paved with low water absorption, because the floor will often be washed with a large amount of water so that the tiles are not affected by moisture and do not absorb stains.
The wall tiles are made of glazed ceramics, the water content is relatively high, and the back side is generally rough, which is also beneficial for the adhesive to stick the wall tiles to the wall. The floor tiles are not easy to stick firmly on the wall. The wall tiles used on the ground will absorb too much water and become difficult to clean. The visible walls and floor tiles cannot be mixed.
Gas chain saw, Gasoline Chain Saw and petrol chain saw are very professional tools. When using, need to add not only gasoline, but also lubricating oil. In addition, there're throttle switch and electric switch. The gap between bar and saw needs to be adjusted. Pls use it according to the specification.
Gas Chainsaw
Gas Chainsaw,Gasoline Chain Saw,Gas Powered Chain Saw,Petrol Chainsaw
Ningbo Vertak Mechanical And Electronic Co., Ltd. , http://www.vertakgarden.com