Analysis of common faults of ultra-thin circular blade slitting and crimping machine
Difficult to start or unable to operate the blade
1 voltage is insufficient; 2 power supply phase loss; 3 circuit fuse is blown; 4 motor is broken; 5 drive wheel fixed key is off; 6 drive gear is stuck in foreign matter; 7 is damaged or the slot gap is too narrow, the blade is card.
2, automatic shutdown.
1 power off; 2 variable current range adjustment is not correct; 3 drive wheel suddenly falls off; 4 computer input is wrong.
3. The sharpening wheel cannot be lifted freely.
1 Insufficient air pressure; 2 Solenoid valve is damaged; 3 The cylinder that controls the lifting and lowering of the grinding wheel is damaged, or the spring that pulls the return is loose; 4 The grinding wheel and the blade are too tightly attached, which is improperly adjusted by the grinding wheel.
4. Suddenly the machine noise increases and there is rhythm vibration.
1 each fastener is loose; 2 transmission gear flies into the paper
Round knife, round blade, ink scraper, ink scraping blade manufacturer - Maanshan Xiangli Machinery Blade Co., Ltd., specializing in the production of round knife and ink scraper. If you have round knife, ink scraper price, You can always contact us. Phone
Round blade ultra-thin round blade This article comes from: http://
Steel Structures can be used in many
industries such as foundation reinforce, electric power transmission structures
and tubular scaffolding, etc.
A flange can also be a plate or ring to form
a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate
for covering or closing the end of a pipe. A flange joint is a connection of
pipes, where the connecting pieces have flanges by which the parts are bolted
together.
Although the word flange generally refers to
the actual raised rim or lip of a fitting, many flanged plumbing fittings are
themselves known as 'flanges':
There are many
different flange standards to be found worldwide. To allow easy functionality
and interchangeability, these are designed to have standardised dimensions.
Common world standards include ASA/ASME (USA), PN/DIN (European), BS10
(British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped
publishing B16.5 in 1996, and the standard is ASME B16.5
Steel Structures
Steel Structures,Steel Structure Building,Classic Steel Structure,Light Steel Structures
Yixing Steel Pole International Trading Co., Ltd , http://www.yx-steelpole.com