Often there are various questions asked by the customer in the process of using the engraving machine. At the same time, we must learn more about the work in order to ensure the normal work of the engraving machine. Let's take a look at the experience of the engraving machine carving. Hope to help everyone:
1, protect carvings
During the carving process, the carved objects are often misplaced, and we are often distressed to tell customers that their items were damaged during the carving process. In order to avoid these problems, we can check whether the selected engraving pliers or chucks are used wrongly? At the same time, the wear of the pliers or clips can also lead to misalignment of the carved objects! If the pliers or clips are too tight, the ejected objects will also be caused at the moment when the cutter head contacts the carved objects.
2, how to fix the irregular shape of the sculptured objects
For those irregularly shaped carved objects, the surface seems to have been fixed tightly, and will also shake back and forth when under pressure. At this point you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregular in shape, the package itself may be very regular and easy to be fixed. In addition, a small band of irregular shape objects is very important. It is easy to be fixed, or the trial tool fixes its regular parts and discards its irregular parts!
3, the use of tools
If the downward pressure on the sculptured object is great, consider whether you must use a cone nose. If the pressure of the diamond head moves during the engraving process, the pressure on the side of the tool will cause the sculptured object to move. The same problem can be caused if an incorrect diamond knife is used. A 90- or 100-degree diamond knife will deepen the material and cause the material to move during the engraving process.
4, protect the carved objects
Because the precision carving machine is often equipped with multi-functional pliers or chucks, and they are also made of iron, it is easy to damage the sculptured objects or make them fall off during the engraving process. Then, choose some rubber caps or rubber pipes for use. The fixation of the sculptured objects will help.
5, how to sculpt plastic patterns
You can paste the transfer tape on the back of the sculptured object, spray the adhesive on the tape side and apply it on a surface that can be discarded. This can avoid the use of double-sided tape, leaving it difficult to clean. The surface is easy to strip and clean because of transfix tape. Using special sculpted tapes, this tape is more viscous on one side than on the other, so the plate can be moved or replaced at will.
In short, if you want to engrave machine carving to meet the requirements of customers, usually if you learn from experienced masters, you will certainly be able to do more with less, greatly improve work efficiency and effectiveness, customer satisfaction, the boss can rest assured, why not?
Calcium Nitrate
Calcium Nitrate,Calcium Ammonium Nitrate,Calcium Nitrate Granular,Ca 18.8% Granular Calcium Nitrate
SHANXI HUAXIN FERTILIZER CORP. , https://www.sxhuaxingroup.com