Photovoltaic distributed power generation will come out

Photovoltaic distributed power generation will come out

At the national conference on distributed photovoltaic power generation held in Jiaxing, Zhejiang, the leaders of the National Energy Administration stated that they are ready to further develop distributed PV distribution notifications. A photovoltaic industry source told the "First Financial Daily" reporter that the new deal is likely to be "on the implementation of distributed photovoltaic power generation related policies notice" (hereinafter referred to as "distributed notice").

Recently, the National Energy Administration issued a draft of a “Distributed Notice” to some PV companies and related departments. According to this request for comments, China’s distributed enterprises “can use photovoltaic power generation projects for land resources such as abandoned land, barren hills, slopes, agricultural greenhouses, mudflats, fishponds and lakes, and are connected to the grid at voltage levels of 35 kV and below. The project capacity (up to 20 megawatts) and the amount of power generated in the grid-connected transformer station area can be used to implement the local PV power plant benchmark price policy.

When the above policy is extended to various places, it will be adjusted. "It is possible to use 6 MW as a ceiling instead of 20 MW. Even if it is to implement a 6 MW scale, it should be considered as good news. “A deputy general manager of a listed company once told this reporter that such projects as greenhouses and fish ponds were previously classified as centralized power generation, and their size usually does not exceed 2 megawatts. It is difficult to obtain approval before this. Now that local policies have expanded the scale of such projects to 6 MW, and they are distributed, they can be submitted for approval and approval.

According to Ding Wenlei, executive director of Hangchu Solar Energy, “The new policy can be understood as follows: If a distributed project can be used for self-use, that is to say, self-use plus excess online access (the price of excess electricity goes online); if the project cannot be spontaneous, it will all be done. The ground power station price is also the benchmark price.” He said that if a fish pond distributed photovoltaic power generation is constructed in Zhejiang (for self use), then according to the New Deal, the surplus net income rate will increase by more than 14% (from 0.875 yuan/ Kilowatt-hour, up to 1 yuan/kwh. "The biggest benefit is that investors, EPCs, and consumers will be more motivated by distributed projects."

At the same time, if the consultation draft is similar to the one that is about to be issued, the incentive clauses of financial institutions such as banks will also be included. According to the Exposure Draft, the state encourages financial institutions such as banks to combine the characteristics and needs of distributed photovoltaic power generation, implement preferential interest rates for distributed photovoltaic power generation, and extend the ** deadline.

Although many listed companies currently choose to use ** and sign a package cooperation program with China Development Bank to obtain funds, they are still more expensive than banks. If commercial banks can liberalize under this clause, increase the credit line, and support the project, the development of distributed photovoltaic business will also be faster.

A source of Jinko Energy said that it takes some time for the bank to adopt the distributed generation model. “Although some banks have already granted credits to enterprises, they still approve the allocation of cash on a project-by-project basis at the lending stage. The bank will not give you a large sum of money at one time, so you can use it at will.” Say, distributed project investment is not a small number, a 6 MW photovoltaic project, with a total investment of 4.8 to 5.4 million. According to the project's total investment of 5.4 million yuan to measure, the bank's ** 80% of distributed projects, capital use is 4.32 million yuan.

Precision Steel Tube are produced by Cold Drawn and Cold Rolling, with very good OD and ID tolerance and smoothness ,

with very good Concentricity, Good Roundess, Less Deviation, suitable for machinery.


Cold Drawn Seamless tubing (also known as CDS steel tube. Cold Drawn Seamless tubes offer tight tolerances compared to Hot Finished Seamless tube, and offers stronger physical properties compared to other mechanical tubing.


CDW Steel Tubes  is made by drawing the ERW tubes from the tube mills through a plug and die combination, mounted on the draw bench. The end tagged and annealed tubes are drawn through a closely machined die that controls the outside diameter of the tubes. At the same time the tube passes over a plug that controls the inside diameter. Further, the manufactured tubes are processed by the downstream facilities for different industry applications.


Technical Standard according to:

ASTM A513, ASTM A519,

DIN2391, EN10305-1, EN10305-4,

SAE J 524, SAE J525 etc.


Steel Grade:

SAE 1010, SAE 1020, SAE 1026, SAE 4130, SAE 4140.

ST35.8, ST37.0, ST52, E235, E355, 42CrMo4,etc


Sizes:

OD: 4.0 to 350mm

WT: 0.5 to 50mm

Length: Cutting Length available, max 12000mm according to Customer PO.


Precision Steel Tubes Seamless Precision Steel Tubes


Automotive Steel Tubes Automotive Steel Pipes


Cutting to Short Length Steel Tubes Steel Tube Cutting to Short Length

Precision Steel Tube

Precision Steel Tube,Hydraulic Precision Steel Tube,Precision Carbon Steel Tube,Precision Seamless Steel Tube,CDS Steel Tube,CDW Steel Tube

Torich International Co.,Ltd--The Steel Tube Maker , http://www.chinasteeltubepipe.com