Construction template good or bad discriminating method

The demand for construction templates in the industry is very large, which provides a good reason for some unscrupulous manufacturers. Hebei architectural template manufacturers have advantages and disadvantages, construction templates are good or bad, in the face of a dazzling array of architectural templates, you will feel no choice, in order to allow consumers to easily shopping, avoiding poor quality products, To buy quality templates, Hebei Construction Template Factory recommends that you use the following four methods to identify.

1, boiled method. Cook in water and observe cracking and degumming. Many big brand building templates are not problematic when cooked in hot water for 8 hours. There are some top grade phenolic glues that cook for 24 hours.
2, use method. In actual applications, check your own results.
3, look at brand law. To select a building template, you must select a company with a top reputation. In general, their products are of good quality and at the same time, the cost performance is higher. The current form is that products with low prices can only be used 4-5 times, while prices with slightly higher prices can be used more than 10 times.
4. Observe the type of glue. At present, there are three kinds of glue used in the architectural templates supplied on the market. That's urine, cyanoacrylate, phenolic glue. Some unscrupulous dealers say urethane as chlorocyal, and chlorocyanate as phenolic glue to make high profits.

100% pure PTFE teflon plastic products
Specification
Molded PTFE Sheet
Thickness: 4mm to 150mm; Size: 1mx1m, 1.2mx1.2m, 1.22mx1.22m, 1.5mx1.5m. Density: 2.3g/cc. Produced by compression molding processing, moulding, sintering, cooling of suspension PTFE resin. Low temperature and high...
Skived PTFE Sheets
Thickness: 0.1mm to 6mm x Sheet or Roll; Width: 1m, 1.2m, 1.22m, 1.5m, 2.0m. Density: 2.3g/cc. Produced by cutting and flatting skived rolled sheet. Low temperature and high temperature resistant (-190°C- +250°C);...

 Filled PTFE Plates 
Thickness: 1mm to 150mm x Sheet or Roll. Produced by compression molding processing, moulding, sintering, cooling of suspension PTFE resin into (color, bronze, glass fiber, graphite, carbon fiber, black, carbon...

Etched PTFE Sheets
Thickness: 0.1mm to 120mm x Sheet or Roll. Sodium processing sheet Produced by sodium treatment of sheet surface according to customers'size requirement. dividing into single-sided and double-sided sodium treatment by...

Expanded PTFE Sheet
Thickness from 0.5mm to 10mm, Size: 1500x1500mm. Density: 0.8g/cc. ePTFE Sheet made from biaxial oriented expanded PTFE Film that is laminated to the required thickness. Expanded 100% virgin PTFE using a..

Extruded PTFE Rods
Dia: 1mm to 200mm, Length: 1m, 2m. Extruded PTFE Rod Produced by plunger extrusion processing of suspension ptfe resin. Pasted PTFE rod Produced by paste push processing of dispersion polymerization ptfe resin.

Molded PTFE Rods 
Dia: 50mm to 600mm, Length: 100mm, 200mm, 300mm, 500mm, 600mm, 1000mm. Molded PTFE rod Produced by compression moulding into pure PTFE.

 Filled PTFE Rod 
Dia: 10mm to 600mm, Length: 100mm, 200mm, 300mm, 500mm, 600mm, 1000mm. ptfe resin into color, bronze, glass fiber, graphite, carbon fiber, black, carbon powder,polyphenylene,anti-static plates,etc


Application:
1 Chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc.
2. Machine: used in piston ring, guide ring, machine tool guideways etc.
3. Electrical and Electronic Engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: PTFE product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc.

PTFE Products

PTFE Parts,PTFE Packing,PTFE Film,PTFE Tubing

ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , https://www.chsealing.com