Wanhua multi-purpose shale crusher realizes waste recycling
Shale is a relatively hard Fenghua hard sedimentary rock with complex composition. It is mainly composed of clay minerals and fine muddy particles pressed and cemented, and formed after weathering. It is this kind of material that has the characteristics of very high temperature resistance, which greatly enhances its utilization value. It is used to fire the best materials for cylinder tiles, pottery and electric porcelain, especially to burn shale bricks. It is a new type of environmentally friendly material, and it is very popular in the market. The best equipment for crushing shale products is the Wanhua shale crusher. The shale crusher can crush the weathered hard shale. The shale crushing with large water content will not cause blockage, which is the guarantee that Wanhua Machinery will make to all users.
The main features of Wanhua shale crusher:
1) Two sets of rotors connected in series to each other, so that the material crushed by the hammer of the upper stage is immediately shredded again by the hammer head of the lower-stage rotor which rotates at a high speed, and the materials of the inner cavity collide with each other in a reverse direction and pulverize each other to reach the hammer powder, The effect of the powder material, direct discharge
2) Shale pulverizer produced by Wanhua Machinery The machine is designed without screen bottom. There is no strict requirement on the moisture content of the material. There is no problem of blocking the sieve plate, and there is no fine powder that can not be discharged in time. Problem, so the crushing efficiency is high, there is no ineffective wear of the hammer
3) After the hammer is worn, the gap between the lining and the lining becomes larger and the grain size becomes thicker, and the position of the hammer head can be moved outward from the center to reduce the gap between the lining plate and continue to be used. It is also possible to adjust the gap from the outer and inner lining plates to control the discharge granularity.
4) Hydraulic opening and closing device, it only needs one person to easily open and close the casing, which is not only light and fast, safe and reliable, and easy to maintain.
Our main products: shale crusher, cinder crusher
Company Name: Gongyi Wanhua Machinery Manufacturing Co., Ltd. Contact Mobile Phone Address: http://
4.0MM SPC Vinyl Flooring can be easily installed on different type of floor base, either concrete, ceramic or existing flooring;
It`s formaldehyde free, completely safe flooring covering materials for both residential and public environment.
UV coating is a very important and necessary processing for SPC Flooring (Rigid vinyl plank), which is processed after the extrusion or lamination and before profiling (chamfering).
The main reasons for UV coating on SPC flooring (Rigid vinyl plank) are as to enhance the surface wear-resistance feature, we use 0.3mm (12mil) or 0.5mm (20mil) wear-layer on our SPC Vinyl Flooring to make it strong wear-resistance for heavy traffic or home using.
4.0MM SPC Vinyl Flooring,Wood Patterns,PVC Vinyl Flooring,PVC Dry Vinyl
GreenOmni Surface Co., Ltd , http://www.greenomnifloors.com