The induction squatting device is only in the sensing range, and the squatting device performs automatic rinsing. Otherwise, the rinsing process, rinsing time and sensing distance can be adjusted. Do you feel so curious about this intelligent water-saving sanitary ware? What is the principle of the induction squatting pan? How to install the induction squatting pan? Let's take a look at all aspects of the induction squatting pan.
What is an induction squatting pan
Induction squatting device is to install a solenoid valve on the inlet pipe of the original automatic water tank, and install an infrared sensor and a control box at the entrance of the public toilet. The infrared sensor automatically detects the scene. When someone enters the public toilet, the infrared sensor will detect it. The signal is sent to the control box. The microcomputer in the control box issues a command after the predetermined program is processed. The solenoid valve is controlled to flush the water into the automatic water tank for flushing. If no one enters the public toilet, the whole system will “hold the motion†and will not flush. In this way, the effect of “unattended, automatic management, and some people rush, no one stops†is realized.
Induction squatting pan installation
Induction Squatting Pan Installation Precautions
(1) Inductive squatting parts All parts in contact with concrete should be filled with elastic materials such as asphalt or linoleum, otherwise the toilet will rupture due to cement expansion.
(2) When the asphalt is heated and dissolved, the toilet should be prevented from being broken due to heat.
(3) The installation of the induction squatting device should be carried out in strict accordance with the instructions, otherwise the induction squatting device will be broken.
(4) Induction squatting water inlet flushing device mainly includes ball valve, high water tank flushing, electromagnetic induction flushing valve and the like.
(5) Avoid violent impact during installation and use.
Induction squat sensor installation
1. Check if there is any foreign matter in the drain pipe and the product passage before installing the squat pan.
2. Try to fix the installation position and height of the squat and the squatting device after the sewage outlet and the sewage pipe are docked.
3. Install the inlet water and water tank. The inner diameter of the inlet pipe is about 28mm. The distance from the bottom of the tank to the inlet of the squatting tank is 1500mm-1800mm. If the installed hand pressure is above 0.2Mpa, the water consumption is 9 liters.
4. After the flange rubber ring is placed on the inlet pipe, it is docked with the squatting device, and then the squatting device mounting surface is fixed. When fixing the mounting surface, the front, back, left and right sides of the squatting pan must be leveled and reused. The glass glue or cement sand pad seals the interface between the product sewage outlet and the sewage pipe. The above describes what is the two parts of the induction squatting pan and the induction squatting pan. Compared with traditional squatting pans, is the induction squatting pan more convenient to clean? However, the use of induction squatting pans requires special attention to the cleaning and maintenance of the sensors, so keep this in mind.
Duplex Stainless Steels Available
Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.
Duplex Stainless Steel Overview
Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.
Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507
Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like Zeron® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.
What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
Good weldability
In what Applications are Duplex Stainless Steels® used ?
Oil and gas equipment
Offshore technology
Seawater desalination plants
Chemical industry, especially when handling chlorides
Flue-gas cleaning
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Bridges
Storage tanks
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts
Duplex Steel Seamless Tube,Duplex Stainless Steel Tube,Duplex 202 Seamless Steel Tube
YUHONG GROUP CO.,LIMITED , https://www.alloypipeline.com