Nowadays, most people are increasingly demanding quality life. Therefore, the bathing enjoyment is getting higher and higher. Therefore, for better enjoyment, many people will install a shower room in the bathroom to achieve dry and wet separation and cold. The purpose of warmth, decoration and beauty, in order to better use the shower room, many people will choose to install a sliding door in which, so that more convenient in and out, the following Xiaobian will give you a brief introduction to how to choose the size of the shower room sliding door Well, I hope to help your purchase.
How to choose the size of sliding door in shower room
1, tempered glass
This texture is used more frequently at home, the thickness is about 4 ~ 10mm, the specific need more thick should be selected according to the actual situation at home, but the thicker glass is not the safer Oh, if it is too thick will not only cause costs The lifting will also make the load on the pulleys and hardware heavy, the probability of problems will increase, and the service life will be shortened.
2, the size of choice
For the size of the choice should also be based on the actual situation of individuals at home, first and foremost to ensure that the user's body can freely rotate, not always touch the glass, the general size is 900 * 900mm is better, of course, if the family wants to enjoy a spacious shower environment, You can continue to expand, there is not a fixed value for the size of the sliding door, but it is best not to be less than 800 * 800mm.
3, prevent blew
As we all know, in order to prevent cold in the winter bathing, many people will put heaters or Yuba in the bathroom, so you can enjoy a more comfortable bathing time, but we must pay attention to the best not to put the shower room near the sliding door area, To prevent moisture, in addition, if the shower room is large enough, do not place it in the shower and glass, otherwise it will not only achieve heating effect, but also easily lead to product aging or self-explosion.
Shower room sliding door installation skills
1, install the sliding door wheel
Generally speaking, the hole of the wheel will be reserved under the sliding door, because it is necessary to rely on the pulley during the movement. First, two wheels are placed above the door frame, and after the wheel is placed on, it is placed in the corresponding position, and then the lower wheel is debugged and installed.
2, fixed sliding door
After the door frame is placed, it needs to be fixed, but it does not mean that it cannot be moved completely, but that it can be removed from the frame. In the same way as the fixed frame, the connection piece is fastened using pliers and a screwdriver.
3, debugging sliding door
After resetting the sliding door, you must not forget the debugging link. At this time, you can try to push the door to see if the door is open or closed, and whether there is a closed gap. If it exists, you must take measures to re-commission.
4, install the sliding door handle
Of course, moving the door will inevitably require the storage of the handle. Otherwise, it is inconvenient to use. First, separate the handles, and then align the holes in the glass and fix them with screws. This way, a sliding door is installed.
Summary: The above is a shower room sliding door How to choose the size of the knowledge presented, I believe most users how to choose the size of shower sliding door already have a better understanding, of course, if you have better suggestions and ideas, please feel free consultation Xiao Bian.
Shower room sliding door
Metal steel frame screens main feature as follows:
1.These products screen panels are constructed with two or three 304 or 316 stainless steel wire cloth layers with s steel backing plate and steel frame combined together. Because of different mesh size and hole size, get an better filtering effect.
2.The bottom high strength steel frame, supporting bar with the moderate tension screen cloth, combined together, infinitely enhance the screen intensity and endurance, get an better filtering effective. Mesh sizes ranging from 20to 325. The whole cloth is divided into independent small surfaces, prevent the part excessive expansion damaged, with a special rubber plug together to repair damage, can save the time to replace the screen, Increase the efficiency and reduce the cost.
Metal Steel Screen Common Model |
||||
Model | Brand&Model for shaker | Mesh Range | Dimension(Length xWidth | Weight |
SJ-1 |
Brandt BL-50 |
40-325 | 1253X635mm | 13.5KGS |
SJ-2 |
Swaco Mongoose |
40-325 |
1165x585mm | 14KGS |
SJ-3 |
Kemtron 48 Series |
40-325 |
1220x720mm | 17.5KGS |
SJ-4 |
Kemtron 48 Series |
40-325 |
913x650mm | 12.6KGS |
KING COBRAâ„¢ VENOMâ„¢ Shaker is manufactured by National Oilwell Varco (NOV), a oilfield service company based in the USA with branch company in most oil reach countries.
NOV Brandt King Cobra Screen is pre-tensioned screen and wedged installation.
NOV Brandt King Cobra Screen | |
Mesh Size | API 20 – API 400 |
Dimension | 1253mm x 630mm (49 1/5″ x 24 4/5″) |
Frame Material | Steel Frame |
Wire Mesh Material | S.S304 or S.S316 as per request |
Screen Layer | 2 or 3 Layers |
Metal Steel Frame Shale Shaker Screen
Shale Shaker Screen,Oil Shale Shaker Screen,Conventional Metal Frame Shaker Screen,Industrial Shale Shaker Screen
Anping Shengjia Hardware Mesh Co.,LTD , https://www.oilshaleshakerscreen.com