Many families have both fabric furniture, solid wood furniture and leather furniture, and many housewives do not know that the maintenance of the three is different. In fact, different materials of furniture, there are different maintenance methods, must be treated differently.
Maintenance of fabric furniture
Fabric furniture has the characteristics of being able to change the cloth cover at any time and is easy to clean. At the same time, the material is soft and not easy to damage. In normal times, as long as it is cleaned frequently, the surface can be cleaned, but large parts such as mattresses, in addition to the cleaning work on weekdays, Better maintenance results through reasonable use.
Reduce contact friction
Try to avoid many people sitting on the edge of the mattress often, do not step on the mattress, so that the mattress is kept flat and extend the service life; the mattress can be turned over and used regularly, can be turned upside down or reversed, so that the mattress is stressed For uniformity, the average family should be replaced once every 3 months; the spring mattress should pay attention to place a cotton felt or bedding on the contact part with the bed frame to reduce friction and prolong life.
Smooth handling
If the bed is to be moved, it must be placed flat and stable. It is best to use a special pad at the four corners of the floor to keep the overall structure stable. At the same time, do not bend the mattress during handling. Bundle with a rope to avoid collisions to prevent the mattress from damaging or damaging the internal structure.
Leather furniture maintenance
The most feared of leather furniture is stained with oil or scratched. Do not use water directly when cleaning. Use a dry cloth with a special leather cleaner to gently wipe. For homes with pets or children, be especially careful with kittens, puppy paws or small children scratching the furniture surface with sharp objects.
Regular cleaning
Do not directly care for the leather sofa. The most important thing is the breathing of the leather. Therefore, it should be cleaned regularly to keep the pores on the surface of the leather from being blocked by dust. When scrubbing, wipe it with cotton cloth or silk and wipe it gently. You can also use Bi Lizhu or glazing wax to spray it again to keep it clean. If you accidentally contaminate the oil stains, use a cotton cloth, a towel, a moderate amount of neutral soapy water, and then dry with a dry cotton cloth. Do not scrub directly with water. After cleaning, the leather sofa can be sprayed with a special leather cleaner, and repeatedly rubbed with silk to prevent cortical aging.
Avoid direct sunlight
Avoid direct sunlight in the vicinity of leather furniture, and do not directly contact high-temperature heat-resistant sources, otherwise it will lead to aging and deterioration of the cortex.
Wooden furniture maintenance
For wooden furniture, it is most prone to deformation in wet weather, so keep a ventilated, dry environment, and often clean the surface to achieve good maintenance.
Avoid high temperature and keep dry
Because the material of wooden furniture is natural wood, it has the characteristics of plants, so it should not be placed in the place where the sun can be directed, nor should it be "blowed" to the heating of the air conditioner. If it is close to the window, it needs to be in the sunshine. Pull the curtains when strong to avoid fading of the paint film. At the same time, the wooden table should avoid direct contact with the overheated tableware to prevent the food and soup from overflowing and damaging the table. Always keep the furniture dry, and always ventilate the room to avoid the environment being wet.
Wipe the corrosion inhibitor
For those who love cleanliness, they may wipe the furniture every day, but it is worth noting that the rag should not be washed with hot water, alkaline water or disinfectant, and not exposed to corrosive substances such as alcohol and nail polish. That would destroy the paint on the furniture surface. The best way to do this is to use a tweezers to rub the surface of the floating soil or wipe it with a damp cloth.
Regular waxing
It is also very important to polish and polish regularly, and it is generally possible to maintain it once a quarter. First clean the surface of the furniture with a soft cloth, then evenly rub the surface with the special glazing wax for the furniture, and then polish it with a clean soft cloth. This will enhance the moisture and light resistance while maintaining the long-lasting brightness of the furniture. .
Welding tube is one of the simplest and most durable ways to join piping together and steel pipes can simply be welded together with MIG (metal inert gas), TIG (tungsten inert gas or SMAW (stick metal arc) welding. Before welding two pipes together, avoid any gaps between the two pipes. While welding, take measures to ensure the continual alignment of the two pipes.
Steel Tube,Carbon Steel Tube,Cold Drawn Steel Tube,Hollow Section Steel Tube,Galvanized Square Steel Pipe,GI Steel Tube
TIANJIN ZHENXIANG STRIP PROCESSING CO., LTD. , http://www.zhenxiangsteel.com