(1) The roof waterproofing layer is exposed to nature, exposed to hot sunlight, wind blows, and rain and snow erosion
The temperature of severe cold and winter heat afflicted, the change of temperature difference between day and night was repeated, and there was no excellent wood quality and good protection measures. It was difficult to achieve the required durability. Therefore, a waterproof material with high tensile strength, high elongation, and good aging resistance should be selected.
(2) Why the wall leaks, because now the wall is too thin, mostly for light block masonry, a large number of internal and external joints, and then the combination of doors and windows and the wall, the seal is not strict, rain from the seam infiltration. Waterproof wall can not be used coil, only paint, and the combination of exterior decoration materials. Only sealant can solve the problem.
(3) Waterproof materials for underground buildings. The underground waterproof layer is soaked in water or very moist soil for a long time. The waterproof material must have good water resistance.
(4) There are three characteristics of waterproofing in toilets. The first is not affected by the natural climate, the temperature change is not, the material's elongation rate is not high; second, the area is small, there are many yin and yang angles, and there are many pipes through the floor; Third, the waterproof layer on the wall is tiled and bonded. Agent affinity is good. According to the above three characteristics, it is not possible to choose a coil, only the coating is most suitable.
(5) There are more and more overpass projects in urban construction, and reinforced concrete slabs must be waterproof in order to extend the service life.
White Stocking,Silk Stockings,Knee High Sock,Sock Manufacturer
Sellers Union Co., Ltd , http://www.nbshousehold.com