(1) newly put into use the pump, usually after 100 hours of operation to be replaced grease (oil), every 500 hours after the operation of a change. (2) the use of grease lubrication of the flow of bearings, running 1500 hours, the grease should be replaced, the amount of fuel filling should not be too much or too little, because too much or too little grease can cause bearing fever, the general amount of fuel In the bearing chamber volume 1/2 ~ 2/3 is appropriate. (3) For bearings lubricated with oil, the oil quantity should be added to the specified position. (4) Sheng lubricating oil or grease container should be clean, usually should be sealed, there should be no dust, iron filings and other debris, so as not to damage the bearings (5) motor bearings are generally used sodium-based grease, grease Characteristics are able to withstand high temperatures (125 ℃), but easily soluble in water, it can not be used for pump bearing lubrication.
trolley
Heavy Duty Caster Cast,Rubber Caster Cast,Warehouse Tool Trolley,Pneumatic Caster Wheel
Guangzhou Weihang Caster Co., Ltd. , https://www.factory-metal.com